Enhanced Long-Term Corrosion Resistance of 316L Stainless Steel by Multilayer Amorphous Carbon Coatings
Open Access
Abstract
Diamond-like carbon (DLC) coatings are effective in protecting the key components of marine equipment and can greatly improve their short-term performance (1.5~4.5 h). However, the lack of investigation into their long-term (more than 200 h) performance cannot meet the service life requirements of marine equipment. Here, three multilayered DLC coatings, namely Ti/DLC, TiCx/DLC, and Ti-TiCx/DLC, were prepared, and their long-term corrosion resistance was investigated. Results showed that the corrosion current density of all DLC coatings was reduced by 1–2 orders of magnitude compared with bare 316L stainless steel (316Lss). Moreover, under long-term (63 days) immersion in a 3.5 wt.% NaCl solution, all DLC coatings could provide excellent long-term corrosion protection for 316Lss, and Ti-TiCx/DLC depicted the best corrosion resistance; the polarization resistances remained at ~3.0 × 107 Ω·cm2 after immersion for 63 days, with more interfaces to hinder the penetration of the corrosive media. Meanwhile, during neutral salt spray (3000 h), the corrosion resistance of Ti/DLC and TiCx/DLC coatings showed a certain degree of improvement because the insoluble corrosion products at the defects blocked the subsequent corrosion. This study can provide a route to designing amorphous carbon protective coatings for long-term marine applications in different environments.Keywords
Funding Information
- State Key Project of Fundamental Research of China (2022YFB3808802, 52025014, U20A20296, 2022J305)
- National Science Fund for Distinguished Young Scholars of China (2022YFB3808802, 52025014, U20A20296, 2022J305)
- National Natural Science Foundation of China (2022YFB3808802, 52025014, U20A20296, 2022J305)
- Natural Science Foundation of Ningbo Municipality (2022YFB3808802, 52025014, U20A20296, 2022J305)
This publication has 61 references indexed in Scilit:
- Long-term tribocorrosion resistance and failure tolerance of multilayer carbon-based coatingsFriction, 2022
- Self-assembly of TaC@Ta core–shell-like nanocomposite film via solid-state dewetting: Toward superior wear and corrosion resistanceActa Materialia, 2018
- Toughness enhancement and tribochemistry of the Nb-Ag-N films actuated by solute AgActa Materialia, 2017
- Corrosion and Wear Behaviors of Cr-Doped Diamond-Like Carbon CoatingsJournal of Materials Engineering and Performance, 2017
- Electrochemical Impedance Studies on Tribocorrosion Behavior of Plasma-Sprayed Al2O3 CoatingsJournal of Thermal Spray Technology, 2015
- Monitoring of bearing wear in a marine engine by change of piston position — Effect of wear and inertiaInternational Journal of Precision Engineering and Manufacturing, 2013
- Improvement of mechanical and tribological properties in steel surfaces by using titanium–aluminum/titanium–aluminum nitride multilayered systemApplied Surface Science, 2012
- Effects of duty cycle on microstructure and corrosion behavior of TiC coatings prepared by DC pulsed plasma CVDApplied Surface Science, 2012
- Wear‐corrosion performance of Si‐DLC coatings on Ti‐6Al‐4V substrateJournal of Biomedical Materials Research Part A, 2007
- A study on the quantitative determination of through-coating porosity in PVD-grown coatingsApplied Surface Science, 2004