Mechanical strength of epoxy/organoclay/carbon fiber hybrid composites
Authors:
Open Access
- 1 September 2017
- journal article
- Published by LUKASIEWICZ Research Network - Industrial Chemistry Research Institute in Polimery
- Vol. 62 (09) , 658-665
Abstract
The influence of organoclay (bentonite BS) modified with quaternary ammonium (QAS) and phosphonium salts (QPS) on the mechanical properties of epoxy/organoclay/carbon fiber hybrid composites was investigated. The longitudinal flexural strength of the composites containing 1 wt % BSQAS and BSQPS increased by 4 and 10 %, respectively, compared to the reference sample (epoxy resin/carbon fiber). Moreover, there was also a significant improvement, up to 13 %, of Young's modulus and transverse elastic modulus for the composites with modified bentonites. On the basis of the atomic force microscopy cross-section analysis (AFM), it was found that the composites with matrix containing the modified bentonites were characterized with larger interfacial surface, about 50 %, than that of unmodified matrix (epoxy resin/carbon fiber).Keywords
This publication has 29 references indexed in Scilit:
- Toughened carbon fibre-reinforced polymer composites with nanoparticle-modified epoxy matricesJournal of Materials Science, 2016
- Formation of a carbon fiber/polyhedral oligomeric silsesquioxane/carbon nanotube hybrid reinforcement and its effect on the interfacial properties of carbon fiber/epoxy compositesCarbon, 2011
- Quasi-static and impact fracture behaviors of CFRPs with nanoclay-filled epoxy matrixComposites Part A: Applied Science and Manufacturing, 2011
- Mode I interlaminar fracture behavior and mechanical properties of CFRPs with nanoclay-filled epoxy matrixComposites Part A: Applied Science and Manufacturing, 2007
- Toughening polymeric composites using nanoclay: Crack tip scale effects on fracture toughnessComposites Part A: Applied Science and Manufacturing, 2007
- Enhancing compressive strength of unidirectional polymeric composites using nanoclayComposites Part A: Applied Science and Manufacturing, 2006
- Preparation, morphology and thermal/mechanical properties of epoxy/nanoclay compositeComposites Part A: Applied Science and Manufacturing, 2006
- Materials science and engineering: An introduction (2nd edition)Materials & Design (1980-2015), 1991
- High strength, high fracture toughness fibre composites with interface control—A reviewComposites Science and Technology, 1991
- Epoxy Resins and Composites II1986