Effects of Mo back contact thickness on the properties of CIGS solar cells
- 5 May 2009
- journal article
- research article
- Published by Wiley in Physica Status Solidi (a)
- Vol. 206 (5) , 1063-1066
Abstract
Effects of Mo back contact thickness on the photovoltaic properties of CIGS solar cells were investigated. When the Mo was thin, an increase in series resistance and leakage current adversely affected the FF (fill factor) in solar cells fabricated using the Mo layers. On the other hand, when the thickness of the Mo layer was as thick as 0.8 μm, sodium out‐diffusion from the SLG decreased. The resulting reduced sodium concentration in CIGS films grown on top of the contact layers resulted in reduced open circuit voltage (VOC). As a consequence of the tradeoff between the decreased sodium diffusion for thicker Mo layers and reduced FF in thin Mo layers, the optimal Mo thickness was found to be 0.2 μm. Water vapor introduction during the deposition of the CIGS absorber layer was found to be effective in improving overall photovoltaic properties especially in solar cells with thin Mo back contacts. With water vapor introduction, cell efficiencies as high as 16.9% and 16.0% were obtained with Mo thicknesses of 0.2 μm and 0.07 μm, respectively.Keywords
Funding Information
- Incorporated Administrative Agency, New Energy and Industrial Technology Development Organization (NEDO) under the Ministry of Economy, Trade and Industry
This publication has 6 references indexed in Scilit:
- Manufacturing and application of CIS solar modulesThin Solid Films, 2007
- Control of the thin film properties of Cu(In,Ga)Se2 using water vapor introduction during growthJournal of Applied Physics, 2006
- Effects of water vapor introduction during Cu(In1–xGax)Se2deposition on thin film properties and solar cell performancePhysica Status Solidi (a), 2006
- Adjusting the sodium diffusion into CuInGaSe2 absorbers by preheating of Mo/SLG substratesJournal of Physics and Chemistry of Solids, 2003
- Electrical properties of the Cu(In,Ga)Se2/ MoSe2/Mo structureSolar Energy Materials and Solar Cells, 2001
- Na incorporation in Mo and CuInSe2 from production processesSolar Energy Materials and Solar Cells, 1999