Thermal stability and superplastic behaviour of an Al-Mg-Sc alloy processed by ECAP and HPT at different temperatures
Open Access
- 8 May 2017
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 194 (1) , 012013
Abstract
An Al-3%Mg-0.2%Sc alloy was processed by ECAP and HPT at different temperatures. Afterwards, samples subjected to 10 turns of HPT at 300 and 450 K, 8 passes of ECAP at 300 K and 10 passes of ECAP at 600 K were annealed for 1 hour at 523 K and their mechanical properties and microstructure were examined using microhardness measurements and EBSD analysis. In addition, tensile specimens with similar dimensions were machined from the HPT and ECAP-processed materials and further tensile tested at 523 K. The results demonstrate that the Al alloy processed by HPT at 450 K exhibits higher microhardness values (~138 Hv) and a smaller average grain size (~0.28 µm) after annealing at 523 K among all SPD processing conditions. Accordingly, the material subjected to HPT at an elevated temperature displays superior superplastic properties such that an elongation of ~1020 % was attained after testing at 523 K at 1.0 × 10-3 s-1. Furthermore, detailed EBSD analysis revealed a significant fraction of low-angle grain boundaries (LAGBs > 33 %) in the ECAP-processed material after annealing which may be responsible for the inferior superplastic behaviour by comparison with the HPT-processed samples (LAGBs < 13 %) tested at 523 K.Keywords
This publication has 35 references indexed in Scilit:
- Influence of grain size on the flow properties of an Al-Mg-Sc alloy over seven orders of magnitude of strain rateMaterials Science and Engineering: A, 2017
- Mechanical Behavior of an Al–Mg–Mn–Sc Alloy with an Ultrafine Grain Structure at Cryogenic TemperaturesAdvanced Engineering Materials, 2015
- Twenty-five years of ultrafine-grained materials: Achieving exceptional properties through grain refinementActa Materialia, 2013
- Extraordinary high-strain rate superplasticity of severely deformed Al–Mg–Sc–Zr alloyMaterials Science and Engineering: A, 2012
- Using high-pressure torsion for metal processing: Fundamentals and applicationsProgress in Materials Science, 2008
- Principles of equal-channel angular pressing as a processing tool for grain refinementProgress in Materials Science, 2006
- Effect of Mg addition on microstructure and mechanical properties of aluminumMaterials Science and Engineering: A, 2004
- Recent development in aluminium alloys for the automotive industryMaterials Science and Engineering: A, 2000
- Bulk nanostructured materials from severe plastic deformationProgress in Materials Science, 2000
- Factors influencing the equilibrium grain size in equal-channel angular pressing: Role of Mg additions to aluminumMetallurgical and Materials Transactions A, 1998