Effect of manufacturing process parameters on the compression and energy absorption properties of 4D-printed deformable honeycomb structure
- 27 June 2024
- journal article
- research article
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 33 (7) , 075035
Abstract
Four-dimensional-printed deformable honeycombs can produce pro-programmed shape deformation and different properties under external stimuli, and the manufacturing process parameters are the dominant factors affecting the microstructure and properties of the manufactured honeycomb structures. Although many researchers have investigated the effects of manufacturing process parameters on the mechanical properties of printed materials, there is still a lack of research on the relationship between manufacturing process parameters and properties of honeycomb structures. Therefore, a novel honeycomb structures which has two configurations under temperature stimuli is proposed, and the optimum manufacturing processes for the printing of this honeycomb are selected considering the compression and energy absorption properties simultaneously. The novel honeycomb is designed and printed with fused deposition modeling technology, which have hexagonal configuration (Structure I) and semi-triangular configuration (Structure II) under external temperature stimulus. The energy absorption capacity of Structure I and compressive properties of Structure II are investigated under different manufacturing process parameters. The experimental results indicate that the layer thickness has the most significant impact on the mechanical performance of deformable honeycombs. The combination of a layer thickness of 0.2 mm, printing speed of 40 mm s−1, and 100% infill density are the best process parameters for the novel deformable honeycomb structures.Keywords
Funding Information
- Taizhou Science and Technology Plan Program (23GYB37)
- Ningbo Key Research and Development Program (2023Z134)
- Zhejiang Provincial Natural Science Foundation of China (LY21E050008)
- National Natural Science Foundation of China (51875525)
This publication has 53 references indexed in Scilit:
- Influence of extrusion 4D printing parameters on the thermal shape-morphing behaviors of polylactic acid (PLA)The International Journal of Advanced Manufacturing Technology, 2024
- Foam-filled aramid honeycomb sandwich composites with high acoustic insulation properties prepared using a unique thermal expansion molding processComposites Communications, 2024
- Research on Microwave-Induced Bidirectional Deformation of Coix Seed Compound Materials in 4D PrintingFood and Bioprocess Technology, 2023
- Melting and solidification performance enhancement of phase change material in a square cavity by utilizing temperature-driven deformable finApplied Thermal Engineering, 2023
- Shape recovery properties and load-carrying capacity of a 4D printed thick-walled kirigami-inspired honeycomb structureBio-Design and Manufacturing, 2023
- Sandwich structures based on fused filament fabrication 3D‐printed polylactic acid honeycomb and poly(vinylidene fluoride) nanocomposites for microwave absorbing applicationsPolymer Composites, 2023
- UV-Vis-NIR Light-deformable Shape-memory Polyurethane Doped with Liquid-crystal Mixture and GO towards Biomimetic ApplicationsChinese Journal of Polymer Science, 2022
- New advances in fiber-reinforced composite honeycomb materialsScience China Technological Sciences, 2020
- Effects of a porous honeycomb structure on critical heat flux in downward-facing saturated pool boilingApplied Thermal Engineering, 2020
- Effect of Filling Pattern on the Tensile and Flexural Mechanical Properties of FDM 3D Printed ProductsExperimental Mechanics, 2019