The influence of SiCp oxidized on the interface layer and thermal conductivity of SiCp/Al composites
- 25 January 2013
- journal article
- research article
- Published by Taylor & Francis in Composite Interfaces
- Vol. 20 (2) , 107-117
Abstract
In this work, oxidation of silicon carbide particles (SiCp) at elevated temperature and its influence on the interface layer and thermal conductivity of SiCp/ZL101 composites prepared using pressure infiltration process were investigated respectively. It is found that initial temperature for the oxidation of SiCp is about 850 °C, and that the oxidation increment of SiCp and the thickness of SiO2 layer increase with the increase in pre-oxidation temperature and time, when the oxidized temperature exceeds 1100 °C, or the duration time exceeds 2 h at 1100 °C, a small amount of ablation will take place on the SiCp, as well as the oxidized layer has some loss. The formation of SiO2 layer can provide certain interface reactions with interface layers (3.1–6.36 μm), and the higher the thickness of SiO2 layer, the thicker the interface layer in SiCp/Al composites. However, the thickness of SiO2 layer is more than 5.9 μm, which is not benefit for the formation of interface layer. With the increase in the thickness of interface layer, thermal conductivity declines, but is not linear.Keywords
This publication has 18 references indexed in Scilit:
- Microstructures and thermal properties of A356/SiCp composites fabricated by liquid pressing methodMaterials & Design (1980-2015), 2012
- Review of metal matrix composites with high thermal conductivity for thermal management applicationsProgress in Natural Science: Materials International, 2011
- Constitutive flow behavior and hot workability of powder metallurgy processed 20vol.%SiCP/2024Al compositeMaterials Science and Engineering: A, 2010
- Microstructures and mechanical properties of spark plasma sintered Al–SiC composites containing high volume fraction of SiCMaterials Science and Engineering: A, 2010
- Limiting the development of Al4C3 to prevent degradation of Al/SiCp composites processed by pressureless infiltrationComposites Science and Technology, 2006
- The fabrication process and mechanical properties of SiCp/Al–Si metal matrix composites for automobile air-conditioner compressor pistonsJournal of Materials Processing Technology, 2001
- Methodology to design the interfaces in SiC/Al compositesMetallurgical and Materials Transactions A, 2001
- The role of silicon in wetting and pressureless infiltration of SiCp preforms by aluminum alloysJournal of Materials Science, 2000
- Effects of process parameters on the properties of squeeze-cast SiCp-6061 Al metal-matrix compositeMaterials Science and Engineering: A, 1996
- Advanced composites for aerospace applicationsComposites, 1981