Enhanced Photocatalytic and Photovoltaic Performance Arising from Unconventionally Low Donor–Y6 Ratios
Authors:
- Andrew DolanADAndrew Dolan
- Xun PanXPXun Pan
- Matthew J. GriffithMGMatthew J. Griffith
- Anirudh SharmaAnirudh Sharma
- Jessica M. de la PerrelleJPJessica M. de la Perrelle
- Derya BaranDerya Baran
- Gregory F. MethaGMGregory F. Metha
- David M. HuangDHDavid M. Huang
- Tak W. KeeTKTak W. Kee
- Mats R. AnderssonMAMats R. Andersson
Open Access
- 18 January 2024
- journal article
- research article
- Published by Wiley in Advanced Materials
- Vol. 36 (15) , e2309672
Abstract
Development of both organic photovoltaics (OPVs) and organic photocatalysts has focused on utilizing the bulk heterojunction (BHJ). The BHJ promotes charge separation and enhances the carrier lifetime, but may give rise to increased charge traps, hindering performance. Here, high photocatalytic and photovoltaic performance is displayed by electron donor–acceptor (D–A) nanoparticles (NPs) and films, using the nonfullerene acceptor Y6 and polymer donor PIDT‐T8BT. In contrast to conventional D–A systems, the charge generation in PIDT‐T8BT:Y6 NPs is mainly driven by Y6, allowing a high performance even at a low D:A mass ratio of 1:50. The high performance at the low mass ratio is attributed to the amorphous behavior of PIDT‐T8BT. Low ratios are generally thought to yield lower efficiency than the more conventional ≈1:1 ratio. However, the OPVs exhibit peak performance at a D:A ratio of 1:5. Similarly the NPs used for photocatalytic hydrogen evolution show peak performance at the 1:6.7 D:A ratio. Interestingly, for the PIDT‐T8BT:Y6 system, as the polymer proportion increases, a reduced photocatalytic and photovoltaic performance is observed. The unconventional D:A ratios provide lower recombination losses and increased charge‐carrier lifetime with undisrupted ambipolar charge transport in bulk Y6, enabling better performance than conventional ratios. This work reports novel light‐harvesting materials in which performance is reduced due to unfavorable morphology as D:A ratios move toward conventional ratios of 1:1.2–1:1.Keywords
Funding Information
- Australian Research Council (DP160103797, DP220102900, LE0989747, LE200100051, DP230102705, FT230100154)
- King Abdullah University of Science and Technology (OSR‐2019‐CARF/CCF‐3079)
This publication has 60 references indexed in Scilit:
- Quantifying Charge Extraction and Recombination Using the Rise and Decay of the Transient Photovoltage of Perovskite Solar CellsAdvanced Materials, 2023
- Charge Concentration Limits the Hydrogen Evolution Rate in Organic Nanoparticle PhotocatalystsAdvanced Materials, 2023
- Identifying the Signatures of Intermolecular Interactions in Blends of PM6 with Y6 and N4 Using Absorption SpectroscopyAdvanced Functional Materials, 2022
- Unraveling Device Physics of Dilute‐Donor Narrow‐Bandgap Organic Solar Cells with Highly Transparent Active LayersAdvanced Materials, 2022
- Y6 Organic Thin‐Film Transistors with Electron Mobilities of 2.4 cm2 V−1 s−1 via Microstructural TuningAdvanced Science, 2021
- Surpassing 13% Efficiency for Polythiophene Organic Solar Cells Processed from Nonhalogenated SolventAdvanced Materials, 2021
- Understanding the Light‐Intensity Dependence of the Short‐Circuit Current of Organic Solar CellsAdvanced Theory and Simulations, 2020
- Quantifying the Nongeminate Recombination Dynamics in Nonfullerene Bulk Heterojunction Organic Solar CellsAdvanced Energy Materials, 2019
- Charge Carrier Extraction in Organic Solar Cells Governed by Steady‐State MobilitiesAdvanced Energy Materials, 2017
- An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar CellsAdvanced Materials, 2015