Damp‐heat induced degradation in photovoltaic modules manufactured with passivated emitter and rear contact solar cells
Open Access
- 11 March 2022
- journal article
- research article
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 30 (9) , 1061-1071
Abstract
Corrosion is one of the main PV module failure mechanisms, as it can cause severe electrical performance degradation in PV modules exposed to hot and humid environments. Moisture penetrating a photovoltaic (PV) module may react with the metallic components causing corrosion. In addition, acetic acid which is produced by hydrolysis of ethylene vinyl acetate (EVA), the most common encapsulant, may further degrade metallic components. Corrosion is one of the main PV module failure mechanisms, as it can cause severe electrical performance degradation in PV modules exposed to hot and humid environments. The specific chemical reactions involved in the corrosion mechanisms for the different components are well understood. However, which of these causes the most serious degradation in the field, and therefore, most severe power loss is unknown. Moreover, the severity of corrosion in the absence of acetic acid is not yet well researched. This work distinguished between the front and rear side corrosion mechanisms and identified the different electrical signatures observed due to them. The experiment included damp‐heat (DH) conditioning of single‐cell mini‐modules, containing passivated emitter and rear contact (PERC) solar cells, laminated with a polyethylene terephthalate (PET) based backsheet. Furthermore, half‐encapsulated PERC PV cells were tested, with either the front or the rear side exposed. Electrical and material characterisation were conducted for the investigation of the sample degradation, and the performance decrease, related to the degradation of the rear surface passivation, was examined.Keywords
This publication has 24 references indexed in Scilit:
- Study on Mitigation Method of Solder Corrosion for Crystalline Silicon Photovoltaic ModulesInternational Journal of Photoenergy, 2014
- Influence of the Aluminum Paste Surface Density on the Electrical Parameters of Silicon Solar CellsEnergy Procedia, 2014
- Effect of Temperature and Humidity on the Degradation Rate of Multicrystalline Silicon Photovoltaic ModuleInternational Journal of Photoenergy, 2013
- Origin of damp-heat induced cell degradationSolar Energy Materials and Solar Cells, 2013
- The effect of moisture on the degradation mechanism of multi-crystalline silicon photovoltaic moduleMicroelectronics Reliability, 2013
- Principles of Solar Cell Operation2012
- Detection of the voltage distribution in photovoltaic modules by electroluminescence imagingProgress in Photovoltaics: Research and Applications, 2010
- On the detection of shunts in silicon solar cells by photo‐ and electroluminescence imagingProgress in Photovoltaics: Research and Applications, 2007
- Novel Selective Etching Method for Silicon Nitride Films on Silicon Substrates by Means of Subcritical WaterIndustrial & Engineering Chemistry Research, 2000
- United States Patent OfficeACM SIGGRAPH Computer Graphics, 1994