Thermal strengthening of iron ore pellets on steel perforated beds
Open Access
- 30 October 2025
- journal article
- Published by SHEI Pryazovskyi State Technical University in Reporter of the Priazovskyi State Technical University. Section: Technical sciences
- No. 51,p. 79-85
Abstract
The purpose of the work is to substantiate and experimentally verify the effectiveness of using steel perforated grates instead of grate bars in the process of heat treatment of iron ore pellets. The tasks include improving the metallurgical characteristics of pellets, reducing the consumption of heat-resistant steels, and improving the energy efficiency of roasting machines. The research was conducted in semi-industrial (bowl-type installation) and experimental-industrial conditions on conveyor kilns (SM-306, SM-552). It has been established that the optimal live cross-section of a perforated grate with a thickness of 5 mm is 19-20 % with elongated holes with straight edges. Semi-industrial tests have shown that the metallurgical characteristics of pellets calcined on a perforated grate are 3–5% (relative) better in all respects compared to pellets calcined on grates. At the same time, the specific productivity of the installation increased from 0.8 to 0.805 t/m2·hour. Based on these data, a design of grooved perforated pallets with a live cross-section of 20.1 % was developed for industrial testing. The roasting trolley with pallets operated continuously for over 2,280 hours without clogging the holes, forming scale, breaking down, or warping. The maximum temperature of the waste gases under the pallets did not exceed 780 °C due to an increase in the height of the bottom bed (to 215-230 mm instead of 100 mm). Industrial tests confirmed that the strength characteristics of pellets burned on the bottom (especially in the lower layer) are higher, and the abrasion and gas permeability indicators during recovery are better compared to pellets from a grate trolley. The key scientific and practical result is the development and successful industrial testing of a perforated steel grate design, which reduces the consumption of high-alloy metal by 85–87 % compared to grate bars, increases the productivity of roasting machines, and improves the metallurgical properties of pellets. The scientific novelty lies in the comprehensive experimental study of perforated grate bars in industrial conditions and the establishment of optimal geometric parameters for the holes. The practical significance lies in significant savings in expensive materials and increased heat treatment efficiency without major production reconstruction. Further research may be directed toward optimizing the choice of steel grade for hearths (taking into account the high temperature of scale formation) to ensure maximum service lifeKeywords
This publication has 11 references indexed in Scilit:
- CO reduction in sintering flue gas by CFD-ML for process parameters optimizationJournal of Cleaner Production, 2025
- Experimental and numerical investigation of iron ore pellet firing using coupled CFD-DEM methodParticuology, 2024
- Physico-chemical profile and corrosion mechanism of the failure grate bar from iron ore sintering processJournal of Materials Research and Technology, 2022
- Design and Durability of Roller Assemblies in Sintering Machines2022
- CFD prediction of heat/mass transfer in multi-layer sintering process assisted with gaseous fuel injectionInternational Communications in Heat and Mass Transfer, 2021
- Modelling of heat transfer in a straight grate pellet induration reactor complemented with plant scale experimentsMineral Processing and Extractive Metallurgy: Transactions of the Institutions of Mining and Metallurgy, 2021
- Characterization and drying kinetics of iron ore pellet feed and sinter feedDrying Technology, 2020
- A Comparison of Pellet Quality from Straight-grate and Grate-kiln FurnacesMineral Processing and Extractive Metallurgy Review, 2018
- Managing the 1970s energy crises in a state-owned mining company: strategies pursued by the Swedish iron ore producer LKABMineral Economics, 2017
- Thermal cycling of grate-link material for iron ore pelletising processIronmaking & Steelmaking: Processes, Products and Applications, 2016