A 0.8-V Supply, 1.58% 3σ-Accuracy, 1.9-μW Bandgap Reference in 0.13-μm CMOS
- 5 December 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 71 (4) , 1884-1888
Abstract
This paper presents a low-voltage high 3σ-accuracy bandgap reference (BGR) circuit, which greatly reduces the area and power consumption. Its key highlight is the in-sensitivity to the input-referred offset of the error amplifier. This is advantageous compared to the prior work with high 3σ-accuracy. In the prior work, the offset of error amplifier affects not only the PTAT current but also the CTAT current. This makes it necessary to greatly reduce the offset of error amplifier, leading to a huge area and power consumption. By contrast, this work proposes a new automatic current-controlled feedback loop, which greatly reduces the influence of the error amplifier offset on the BGR accuracy. As a result, the error amplifier no longer needs to consume large area or power in order to reduce its offset. This effectively reduces the area and power of the entire BGR circuit. For a fair comparison, both the prior work and this work are designed under the same 0.13μm CMOS process. Post-layout simulation results show that the power of the error amplifier is reduced by about 9 times when compared to the prior work. Furthermore, the total power of the proposed BGR circuit is also reduced by 2.5 times than the prior work.Keywords
Funding Information
- National Natural Science Foundation of China (62004023, 62090041)
- Natural Science Foundation of Sichuan Province (2022NSFSC0492)
This publication has 13 references indexed in Scilit:
- Analog-to-Digital Conversion2022
- 18.7 A 0.7V, 2.35% 3σ-Accuracy Bandgap Reference in 12nm CMOS2019
- Calibration of bandgap voltage reference using chopping technique and IIR filterElectronics Letters, 2016
- Design of area efficient and low power bandgap voltage reference using sub-threshold MOS transistors2015
- A Single-Trim CMOS Bandgap Reference With a $3\sigma$ Inaccuracy of $\pm$0.15% From ${-}$40$^{\circ}$C to 125$^{\circ}$CIEEE Journal of Solid-State Circuits, 2011
- Low-power bandgap references featuring DTMOSTsIEEE Journal of Solid-State Circuits, 1999
- A CMOS bandgap reference circuit with sub-1-V operationIEEE Journal of Solid-State Circuits, 1999
- A simple three-terminal IC bandgap referenceIEEE Journal of Solid-State Circuits, 1974
- A precision reference voltage sourceIEEE Journal of Solid-State Circuits, 1973
- New developments in IC voltage regulatorsIEEE Journal of Solid-State Circuits, 1971