Erosion/tracking resistance investigation of micro/nano-SiO2 filled RTV-SiR composites for outdoor High Voltage insulations
Authors:
- 1 January 2017
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 15-19
Abstract
Research on micro and nano-dielectrics has shown that amalgamation of micro/nano particles into polymer usually enhances its mechanical, thermal and erosion/tracking characteristics. Due to organic-nature, silicone rubber (SiR) insulator outer sheath and weather-sheds are susceptible to environmental and electrical stresses, which lead tracking/erosion of outer surface. In this paper, we have investigated the amalgamation effects of micro and nano-sized silica (SiO 2 ) on the tracking and erosion resistance performance of SiR composites. SiR-blends with different weight percent (wt %) of micro/nano-silica were prepared in a two roll mixing mill according to ASTM-D 1418-10a standard. In order to evaluate the relative tracking and erosion resistance, all SiR-blends were analyzed in the initial-tracking voltage test method of the Inclined Plane Test (IPT) under AC voltage according to ASTM D-2303 standard. Moreover, the Infrared (IR) spectrum and maximum track temperature of SiR-blends were measured by using Fluke-Ti25 infrared (IR) camera. Initial tracking voltage (ITV), Leakage current (LC), percent erosion, time to track and maximum tracking temperature were investigated and discussed. Results showed that micro-silica filled SiR-blend (S2) exhibited higher tracking/erosion resistance, ITV~2.75KV, time to track~240 minutes and minimum eroded mass~ 0.5% compared to neat and nano blends. The erosion/tracking results of SiR-blends suggest, that the tracking and erosion resistance of composite samples are governed by filler type, size and wt% in polymer matrix, which will provide potential for use as High Voltage (HV) insulation applications.Keywords
This publication has 21 references indexed in Scilit:
- Study on glaze electrical erosion characteristics of porcelain post insulator by using inclined plane and graphite-layer-based methodIEEE Transactions on Dielectrics and Electrical Insulation, 2015
- Tracking and surface degradation of barium titanate filled silicone rubber nanocomposites2015
- Investigation into the eroding dry-band arcing of filled silicone rubber under DC using wavelet-based multiresolution analysisIEEE Transactions on Dielectrics and Electrical Insulation, 2014
- Insulator aging tests with HVAC and HVDC excitation using the tracking wheel tester2010
- Performance of silicone rubber in DC inclined plane tracking testsIEEE Transactions on Dielectrics and Electrical Insulation, 2010
- Erosion resistance of alumina-filled silicone rubber nanocompositesIEEE Transactions on Dielectrics and Electrical Insulation, 2010
- Performance of silicone rubber nanocomposites in salt-fog, inclined plane, and laser ablation testsIEEE Transactions on Dielectrics and Electrical Insulation, 2010
- Inclined-plane tracking and erosion test according to the IEC 60587 StandardIEEE Electrical Insulation Magazine, 2009
- Investigation of Tracking Phenomena in Outdoor Polymeric Insulation Material Under DC Voltages Using WaveletsIEEE Transactions on Power Delivery, 2005
- The role of inorganic fillers in silicone rubber for outdoor insulation alumina tri-hydrate or silicaIEEE Electrical Insulation Magazine, 2004