Experimental and numerical study on cavitation performances of a turbopump with and without an inducer
Authors:
- 14 July 2021
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
- Vol. 236 (6) , 1098-1111
Abstract
The cavitation performances and its internal flows in a centrifugal turbopump with and without a three-bladed axial inducer have been studied both experimentally and numerically. A 3D steady numerical model has been applied to simulate the cavitating flow from the inlet to the outlet ducts of the turbopump with and without an inducer by using ANSYS CFX code. In the present work, to clarify this relationship, we conducted experiments in both cold water (T = 20°C) and hot water (T = 80°C) with a focus on the development of vapor volume fraction and head degradation by gradually reducing the inlet pressure from atmospheric conditions to the minimum allowable value at a constant rate of about 3 mbar/s. The measured and predicted cavitation performances of the turbopump with and without an inducer have been compared under different operating conditions and the temperature of the operating fluid.Keywords
Funding Information
- National Natural Science Foundation of China (51609107)
- Senior Talent Foundation of Jiangsu University (15JDG073)
This publication has 13 references indexed in Scilit:
- Investigation into the influences of the low-speed flows' accuracy on RANS simulationsAerospace Science and Technology, 2017
- An evaluation of the tip clearance effects on turbine efficiency for space propulsion applications considering liquid rocket engine using turbopumpsAerospace Science and Technology, 2017
- Aerodynamic impact of a streamwise vortex on a propellerAerospace Science and Technology, 2017
- Geometry Effects on Flow Instabilities of Different Three-Bladed InducersJournal of Fluids Engineering, 2015
- Experimental Validation of a Reduced Order for Radial Turbopump Design2013
- A Review of the Dynamics of Cavitating PumpsJournal of Fluids Engineering, 2013
- Study on the forward-sweep inducer for LRE turbopumpsActa Astronautica, 2009
- A Reduced Order Model for Preliminary Design and Performance Prediction of Tapered Inducers: Comparison with Numerical Simulations2008
- Thermal Cavitation Experiments on a NACA 0015 HydrofoilJournal of Fluids Engineering, 2005
- THE NUMERICAL COMPUTATION OF TURBULENT FLOWS1983