Mechanical and Thermal Properties of Sustainable Composite Building Materials Produced by the Reprocessing of Low-Density Polyethylene, Biochar, Calcium Phosphate, and Phosphogypsum Wastes
Authors:
- 1 February 2022
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 34 (2) , 04021457
Abstract
This paper presents the results of the experimental and analytical studies of the mechanical and thermal properties of laterite composites mixed with reprocessed low-density polyethylene waste (LDPE), calcium phosphate (CaP) and phosphogypsum wastes, and biochar to form brick composites. Bricks with mixtures of 20% by volume LDPE, 15% by volume CaP, and 15% by volume gypsum were shown to have excellent compressive strength, flexural strength, and fracture toughness. The composites with 1% by volume LDPE and 15% by volume biochar had the best blend of mechanical properties, such as flexural strength and fracture toughness, after sintering for . There was a linear association between the strength and the weight loss of the bricks. Scanning electron microscopy and optical microscopy images revealed evidence of crack bridging by LDPE particles. The laterite–LDPE composite mixed with 5%, 10%, and 15% by volume biochar had sintering temperatures of , , and , respectively, after undergoing softening, cold crystallization, and cooling.
Keywords
This publication has 23 references indexed in Scilit:
- Micromechanical Simulation of Fracture Behavior of Nanostructured Metals with Bimodal Grain Size DistributionProcedia Materials Science, 2014
- Influence of cracking clays on satellite estimated and model simulated soil moistureHydrology and Earth System Sciences, 2010
- Environmental impact and management of phosphogypsumJournal of Environmental Management, 2009
- Properties of concrete pedestrian block mixed with crumb rubberConstruction and Building Materials, 2006
- Studies of the Flash Carbonization Process. 1. Propagation of the Flaming Pyrolysis Reaction and Performance of a Catalytic AfterburnerIndustrial & Engineering Chemistry Research, 2005
- Microstructure and mechanical properties of waste fibre–cement compositesCement and Concrete Composites, 2005
- Performance characteristics of high-volume Class F fly ash concreteCement and Concrete Research, 2004
- Ground iron blast furnace slag as a matrix for cellulose-cement materialsCement and Concrete Composites, 2001
- Brazilian waste fibres as reinforcement for cement-based compositesCement and Concrete Composites, 2000
- Properties of some cement stabilised compressed earth blocks and mortarsMaterials and Structures, 1997