Flexural Behavior of Steel Fiber–Reinforced Alkali‐Activated Lightweight Aggregate Concrete Superposed Beams: Experimental and Theoretical Study
- 6 March 2026
- journal article
- Published by Wiley in The Structural Design of Tall and Special Buildings
- Vol. 35 (3)
Abstract
This study investigates the flexural behavior of six steel fiber–reinforced alkali‐activated lightweight aggregate concrete (SFRAALC) superposed beams and one ordinary Portland cement concrete (OPC) beam through four‐point bending tests. The effects of concrete type, topping thickness, and reinforcement ratio on flexural performance were examined in terms of failure mode, load–midspan deflection response, crack development, ductility, and energy absorption. The results show that SFRAALC beams achieved an ultimate flexural capacity comparable to that of the OPC beam, while exhibiting substantially enhanced post‐yield deformability, resulting in markedly higher overall energy absorption under large strains. Increasing the reinforcement ratio significantly improved load‐bearing capacity but moderately reduced ductility, whereas variations in topping thickness had a negligible influence on overall flexural performance. Furthermore, established design codes like GB 50010‐2010 and ACI 318‐19 provided reliable predictions for the ultimate moment of SFRAALC beams, and a proposed plastic influence coefficient method improved the prediction accuracy of the cracking moment.Keywords
Funding Information
- China Scholarship Council (202506950002)
This publication has 39 references indexed in Scilit:
- Shear and Flexural Behavior of UHPFRC‐NC Composite Beams Reinforced With High‐Strength Steel and Steel Fibers Under Static and Cyclic LoadingThe Structural Design of Tall and Special Buildings, 2025
- Numerical study on the flexural and shear behavior of steel fiber and high‐strength steel combination in ultra‐high‐performance fiber‐reinforced concrete beams under cyclic loadingStructural Concrete, 2024
- Alkali-activated materials with organics: A critical reviewComposites Part B: Engineering, 2024
- Investigating the effect of steel micro‐ and macro‐fibers on the bond behavior of steel rebar embedded in ultra‐high performance concreteStructural Concrete, 2024
- Mechanism understanding of alkali-silica reaction in alkali-activated materials systemCement and Concrete Research, 2022
- Experimental and numerical investigations on the flexural performance of geopolymers reinforced with short hybrid polymeric fibresComposites Part B: Engineering, 2017
- Experimental study on flexural behaviour of inorganic polymer concrete beams reinforced with basalt rebarComposites Part B: Engineering, 2016
- Mechanical properties of alkali activated flyash/Kaolin based geopolymer concreteConstruction and Building Materials, 2015
- Setting and mechanical properties of alkali-activated fly ash/slag concrete manufactured at room temperatureConstruction and Building Materials, 2013
- New cements for the 21st century: The pursuit of an alternative to Portland cementCement and Concrete Research, 2011