Robust Low-Cost Control Scheme of Direct-Drive Gearless Traction Machine for Elevators Without a Weight Transducer
Authors:
- 19 March 2012
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 48 (3) , 996-1005
Abstract
This paper proposes a novel low-cost control strategy of gearless traction permanent-magnet synchronous machines for direct-drive elevator applications. It can improve robustness of the weight-sensorless traction machine system installed with an ordinary incremental encoder. In order to improve the riding comfort for the passengers during brake releases, a novel starting torque compensation strategy without a weight transducer is presented. After analyzing the dynamic characteristics and the friction torque of the elevator traction system, two starting torque compensation methods based on the dichotomy and the staircase method are proposed for the weight-sensorless elevator applications. This way, electromagnetic torque can be generated to balance the load torque, and sliding can be prevented when the elevator brake releases during the starting operation. To achieve the current vector decoupling control for the traction machine installed with an incremental encoder, the initial rotor position estimation at standstill based on a hybrid signal injection method is adopted. First, a high-frequency oscillating sinusoidal voltage signal is injected to obtain the magnetic pole position. Then, two pulse voltage vectors are injected in the positive and negative directions to identify the magnet polarity. The experimental results demonstrate the feasibility of the proposed control strategy with an 11.7-kW traction machine.Keywords
This publication has 24 references indexed in Scilit:
- Carrier-Signal Selection for Sensorless Control of PM Synchronous Machines at Zero and Very Low SpeedsIEEE Transactions on Industry Applications, 2009
- Initial rotor position estimation and sensorless direct torque control of surface-mounted permanent magnet synchronous motors considering saturation saliencyIET Electric Power Applications, 2008
- Fuzzy-Logic-Based Vector Control Scheme for Permanent-Magnet Synchronous Motors in Elevator Drive ApplicationsIEEE Transactions on Industrial Electronics, 2007
- Modelling and design of a direct-drive lift control with rope elasticity and estimation of starting torque2007
- Initial rotor position estimation of an interior permanent-magnet synchronous machine using carrier-frequency injection methodsIEEE Transactions on Industry Applications, 2005
- A Novel Method for Initial Rotor Position Estimation for IPM Synchronous Machine DrivesIEEE Transactions on Industry Applications, 2004
- Initial rotor position estimation method for PM motorsIEEE Transactions on Industry Applications, 2003
- Sensorless drive of surface-mounted permanent-magnet motor by high-frequency signal injection based on magnetic saliencyIEEE Transactions on Industry Applications, 2003
- Sensorless initial rotor position estimation of surface permanent-magnet synchronous motorIEEE Transactions on Industry Applications, 2000
- Rotor position and velocity estimation for a salient-pole permanent magnet synchronous machine at standstill and high speedsIEEE Transactions on Industry Applications, 1998