Reinforcement of tungsten carbide grains by nanoprecipitates in cemented carbides
- 9 September 2016
- journal article
- Published by IOP Publishing in Nanotechnology
- Vol. 27 (41) , 415710
Abstract
In contrast to the conventional method that obtains a high fracture strength of tungsten carbide–cobalt (WC–Co) cemented carbides by reducing WC grain size to near-nano or nanoscale, a new approach has been developed to achieve ultrahigh fracture strength by strengthening the WC grains through precipitate reinforcement. The cemented carbides were prepared by liquid-state sintering the in situ synthesized WC–Co composite powders with a little excess carbon and pre-milled Cr 3 C 2 particles having different size scales. It was found that the nanoscale dispersed particles precipitate in the WC grains, which mainly have a coherent or semi-coherent interface with the matrix. The pinning effect of the nanoparticles on the motion of dislocations within the WC grains was observed. The mechanisms for the precipitation of nanoparticles in the WC grains were discussed, based on which a new method to enhance the resistance against the transgranular fracture of cemented carbides was proposed.Keywords
Funding Information
- The National Science Fund for Distinguished Young Scholars (No. 51425101)
This publication has 33 references indexed in Scilit:
- Microstructural formations and phase transformation pathways in hot isostatically pressed tantalum carbidesActa Materialia, 2012
- Grain and phase boundary segregation in WC–Co with small V, Cr or Mn additionsActa Materialia, 2010
- Characterizations of WC–10Co nanocomposite powders and subsequently sinterhip sintered cemented carbideMaterials Characterization, 2006
- Correlation of transverse rupture strength of WC–Co with hardnessInternational Journal of Refractory Metals and Hard Materials, 2005
- Cr-rich layer at the WC/Co interface in Cr-doped WC–Co cermets: segregation or metastable carbide?Journal of Crystal Growth, 2004
- Synthesis of nanosized tungsten carbide powder by the chemical vapor condensation processScripta Materialia, 2004
- Submicron and ultrafine grained hardmetals for microdrills and metal cutting insertsInternational Journal of Refractory Metals and Hard Materials, 2002
- Gradient zones in WC–Ti(C,N)–Co-based cemented carbides: experimental study and computer simulationsActa Materialia, 2000
- WC-Co based cemented carbides with large Cr3C2 additionsInternational Journal of Refractory Metals and Hard Materials, 1998
- Study of nanostructured WC-Co compositesInternational Journal of Refractory Metals and Hard Materials, 1995