Laser-powder bed fusion molds without post-processing for micro-injection molding of mini/micro-products
Open Access
- 17 May 2023
- journal article
- research article
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 127 (1-2) , 677-688
Abstract
The use of additive manufacturing (AM) processes at the micro-scale helps to increase the development of micro-systems, thus enabling shorter tooling development to be exploited for other micro-technologies, such as micro-injection molding (µ-IM). In recent years, these process combinations have shown their capability of providing greater flexibility to micro-technologies and facilitating a high production rate, in particular allowing µ-IM to be economically feasible for low-volume production. Therefore, in order to assess the feasibility of micro-metal AM for µ-IM mold production, a set of mini- and micro-polymeric parts injected by using molds realized via the laser-powder bed fusion (L-PBF) process is discussed in this paper. The molds were manufactured in low-carbon steel and have been characterized and tested experimentally, without any post-process treatment. Two selected geometries, corresponding to a mini dogbone for tensile tests and a flexural hinge with features at the micro-scale, were designed and realized by the µ-IM process. These were replicated in order to assess the accuracy of the whole process. The obtained results of replication accuracy and mechanical tests confirm that the µ-IM process, performed with an L-PBF-made mold insert, is feasible and affordable for micro-production, although great accuracy, especially in mold design, fabrication, and assembly, is required.Keywords
This publication has 25 references indexed in Scilit:
- Modeling and Design of Flexure Hinge-Based Compliant Mechanisms2019
- Development of injection molding tooling with conformal cooling channels fabricated by optimal process parametersThe International Journal of Advanced Manufacturing Technology, 2018
- Numerical and experimental evaluation of a conformally cooled H13 steel injection mould manufactured with selective laser meltingThe International Journal of Advanced Manufacturing Technology, 2017
- Innovative advances in additive manufactured moulds for short plastic injection seriesProcedia Manufacturing, 2017
- Study on the microstructure, mechanical property and residual stress of SLM Inconel-718 alloy manufactured by differing island scanning strategyOptics & Laser Technology, 2015
- SLM tooling for die casting with conformal cooling channelsThe International Journal of Advanced Manufacturing Technology, 2013
- A study on microinjection moulding using moulding blocks by additive micromanufacturingThe International Journal of Advanced Manufacturing Technology, 2013
- Process–property–structure relationship in miniaturized injection moulded polyoxymethylene samplesPolymer Engineering & Science, 2013
- Replication capability of micro injection moulding process for polymeric parts manufacturingThe International Journal of Advanced Manufacturing Technology, 2012
- Manufacturing of 18 Ni Marage 300 Steel Samples by Selective Laser MeltingAdvanced Materials Research, 2009