Pore structure of the phenolic porous material and its mechanical property
Authors:
- 1 December 2014
- journal article
- Published by SAGE Publications in Journal of Cellular Plastics
- Vol. 51 (4) , 401-412
Abstract
To enlarge the knowledge about the control methods of pore size of phenolic porous material and to know the effect of pore size on its mechanical property, experiments were carried out. On the basis of the theory of bubble nucleation, large stirring speed can overcome the surface energy of bubble formation and the nucleating agent can provide a large number of nucleation sites for foaming system. We adopted the methods of accelerating the stirring rate and adding nucleating agent to improve bubble nucleation. Pore size, size distribution and the effects of stirring speed and nucleating agent concentration on them were investigated by scanning electron microscope and computerized image analysis program. Results showed that with the increase of stirring speed, the mean pore size decreases from 246 to 138 µm and the structural homogeneity of phenolic porous material was improved obviously. The nucleating agent has a great effect on the pore structure and optimal amount (5%) at which the pore size is small in level of micrometer and has a good distribution. In addition, the compression testing was carried out by Universal Testing Machine and the test results suggested that the change of micrometer pore structure improves the compression strength of porous material effectively.Keywords
This publication has 21 references indexed in Scilit:
- Preparation and characterization of phenolic foams with eco-friendly halogen-free flame retardantJournal of Thermal Analysis and Calorimetry, 2013
- A novel polyurethane prepolymer as toughening agent: Preparation, characterization, and its influence on mechanical and flame retardant properties of phenolic foamJournal of Applied Polymer Science, 2012
- Diffusivity and Climatic Simulation of Hybrid FoamsJournal of Cellular Plastics, 2010
- Phenolic matrices and sisal fibers modified with hydroxy terminated polybutadiene rubber: Impact strength, water absorption, and morphological aspects of thermosets and compositesIndustrial Crops and Products, 2010
- Effect of pore size and relative density on the mechanical properties of open cell aluminum foamsScripta Materialia, 2007
- Cloisite clay‐infused phenolic foam nanocompositesJournal of Applied Polymer Science, 2006
- Enhanced peel resistance of fiber reinforced phenolic foamsComposites Part A: Applied Science and Manufacturing, 2003
- Microcellular foams from polyethersulfone and polyphenylsulfoneEuropean Polymer Journal, 2002
- Mesocellular Siliceous Foams with Uniformly Sized Cells and WindowsJournal of the American Chemical Society, 1998
- Cellular Solids1997