Effect of Powder Particle Size and Spray Parameters on the Ni/Al Reaction During Plasma Spraying of Ni-Al Composite Powders
Authors:
- 25 January 2021
- journal article
- research article
- Published by Springer Nature in Journal of Thermal Spray Technology
- Vol. 30 (1-2) , 181-195
Abstract
It was known for long that Ni-Al composite powders can be used to deposit self-bonding coating as a bond coat for common ceramic coatings due to the exothermic reaction between Ni and Al. However, it was found that with commercial Ni-Al composite powders with a large particle size, it is difficult to ignite the self-propagating reaction between Ni and Al to form Ni-Al intermetallics by plasma spraying. In this study, Ni-Al composite powder particles of different sizes were used to prepare Ni-Al intermetallics-based coatings by plasma spraying. The dependencies of the exothermic reaction between Ni and Al and the coating microstructure on powder particle size and spray parameters were investigated. The phase composition, microstructure, porosity and oxide content of the coatings were characterized by x-ray diffraction, scanning electron microscope and image analyzing. The results show that particle size of Ni-Al composite powders is the dominant factor controlling the exothermic reaction for the formation of Ni-Al intermetallics during plasma spraying. When the powders larger than about 50 μm are used, the reaction forming aluminide cannot complete even by heating of plasma flame generated at high plasma arc power. However, when smaller powders less than 50 μm are used, the exothermic reaction can completely occur rapidly in plasma spraying, contributing to heating of Ni-Al droplets to the highest temperature for development of the self-bonding effect. The positive relationship between molten droplet temperature and tensile adhesive strength of the resultant coatings is recognized to confirm the contribution of high droplet temperature to the adhesive or cohesive strength.Keywords
This publication has 27 references indexed in Scilit:
- The evaluation of NiAl- and TiAl-based intermetallic coatings produced on the AISI 1010 steel by an electric current-activated sintering methodIntermetallics, 2012
- Plasma Sprayed NiAl Intermetallic Coating Produced with Mechanically Alloyed PowderJournal of Materials Science & Technology, 2011
- Characterization and comparison between APS coatings prepared from ball milled and plasma processed nickel–aluminium powdersMaterials Science and Engineering: A, 2008
- Mechanisms of oxidation and its role in microstructural evolution of metallic thermal spray coatings—Case study for Ni–AlSurface and Coatings Technology, 2006
- Role of thermal spray processing method on the microstructure, residual stress and properties of coatings: an integrated study for Ni–5 wt.%Al bond coatsMaterials Science and Engineering: A, 2004
- Micro-indentation and erosion properties of thermal sprayed NiAl intermetallic-based alloy coatingsWear, 2003
- Effect of sprayed powder particle size on the oxidation behavior of MCrAlY materials during high velocity oxygen-fuel depositionSurface and Coatings Technology, 2003
- The Dynamics of Deposit Formation in Thermal-Spray ProcessesMRS Bulletin, 2000
- The erosion behaviour of NiAl intermetallic coatings produced by high velocity oxy-fuel thermal sprayingWear, 1999
- Phase Determination in Flame-sprayed ‘Nickel Aluminide’ CoatingNature, 1966