Corrosion behaviour of friction-bit-joined and weld-bonded AA7075-T6/galvannealed DP980
- 1 August 2017
- journal article
- research article
- Published by SAGE Publications in Science and Technology of Welding and Joining
- Vol. 22 (6) , 455-464
Abstract
Joining of aluminium alloys 7075-T6 and galvannealed dual phase 980 steel was achieved by friction bit joining (FBJ) and weld-bonding (FBJ + adhesive) processes. Accelerated laboratory-scale corrosion tests were performed on both FBJ only and weld-bonded specimens to study joint strength under a corrosive environment. Static lap shear tests showed that both FBJ only and weld-bonded cases generally retained more than 80% of the joint strength of non-corroded specimens at the end of corrosion testing. The presence of Zn/Fe coating on the steel substrate resulted in improved corrosion resistance for FBJ specimens, compared to joints produced with bare steel. An optical microscopy was used for cross-sectional analysis of corroded specimens. Some corrosion on the joining bit was observed near the bit head. However, the joining bit was still intact on the steel substrate, indicating that the primary bond was sound.Keywords
Funding Information
- Vehicle Technologies Program
This publication has 37 references indexed in Scilit:
- Mechanical and corrosion behavior of plain low carbon dual-phase steelsMaterials & Design (1980-2015), 2011
- Potential and current distributions of one-dimensional galvanic corrosion systemsCorrosion Science, 2010
- Joining of polymers and polymer–metal hybrid structures: Recent developments and trendsPolymer Engineering & Science, 2009
- A Study on Corrosion Behavior of DP-Type and TRIP-Type Cold Rolled Steel SheetMATERIALS TRANSACTIONS, 2009
- On the first breakdown in AA7075-T6Corrosion Science, 2007
- Electrochemical, chemical and morphological characterization of galvannealed steel coatingSurface and Coatings Technology, 2007
- Ultrafine grained ferrite–martensite dual phase steels fabricated via equal channel angular pressing: Microstructure and tensile propertiesActa Materialia, 2005
- Dissimilar material laser welding between magnesium alloy AZ31B and aluminum alloy A5052-OScience and Technology of Advanced Materials, 2005
- Galvanic corrosion of magnesium alloy AZ91D in contact with an aluminium alloy, steel and zincCorrosion Science, 2004
- The metallurgy of zinc-coated steelProgress in Materials Science, 2000