Efficiency-Improved UWB Transparent Antennas Using ITO/Ag/ITO Multilayer Electrode Films
Open Access
- 30 November 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 165385-165393
Abstract
In this paper, a transparent antenna made with a new structure of ITO/Ag/ITO is proposed. Overcoming the physical limitations of transparency and conductivity is an important problem with transparent materials. By studying and comparing previously reported transprent materials, a transparent electrode with thin film Ag inserted between two layers of ITO instead of a single layer is selected for a highly efficient transparent antenna. This electrode has low sheet resistance (3.1 Ω/sq) relative to its high transparency (88 % at 550 nm), which is a factor that can increase the efficiency of the antenna. In general, it is difficult to measure sheet resistance (SR) using a 4-point DC probe for very thin films (thickness of transparent material is less than the skin-depth). Therefore, a form of reverse engineering that can estimate DC sheet resistance using RF SR was presented and verified. As a result, it was possible to predict and design the performance of the transparent antenna with the new material structure. The selected transparent material is applied to design the wideband transparent antenna and the design process for wideband performance is covered in the paper. The proposed antenna with ITO/Ag/ITO was implemented for verification. The peak efficiency of the fabricated antenna was 66 %, and the measured bandwidth was 123 % (from 2.5 GHz to 10.6 GHz), which is the best performance than previously reported transparent antennas.Keywords
This publication has 44 references indexed in Scilit:
- High quality transparent TiO2/Ag/TiO2 composite electrode films deposited on flexible substrate at room temperature by sputteringAPL Materials, 2013
- RADIOFREQUENCY PERFORMANCES OF TRANSPARENT ULTRA-WIDEBAND ANTENNASProgress in Electromagnetics Research C, 2011
- Comparison of electrical, optical, structural, and interface properties of IZO-Ag-IZO and IZO-Au-IZO multilayer electrodes for organic photovoltaicsJournal of Applied Physics, 2010
- Room temperature flexible and transparent ITO/Ag/ITO electrode grown on flexile PES substrate by continuous roll-to-roll sputtering for flexible organic photovoltaicsJournal of Physics D: Applied Physics, 2009
- Low resistance and highly transparent ITO–Ag–ITO multilayer electrode using surface plasmon resonance of Ag layer for bulk-heterojunction organic solar cellsSolar Energy Materials and Solar Cells, 2009
- Highly flexible and transparent InZnSnOx∕Ag∕InZnSnOx multilayer electrode for flexible organic light emitting diodesApplied Physics Letters, 2008
- Human eye sensitivity and photometric qualities2006
- Effects of thermal treatment on the electrical and optical properties of silver-based indium tin oxide/metal/indium tin oxide structuresThin Solid Films, 2003
- Characteristics of Indium-Tin-Oxide/Silver/Indium-Tin-Oxide Sandwich Films and Their Application to Simple-Matrix Liquid-Crystal DisplaysJapanese Journal of Applied Physics, 2001
- Dependence of the electrical and optical behaviour of ITO–silver–ITO multilayers on the silver propertiesThin Solid Films, 2000