Simplified Multiphysics Models for Open-Circuit Quench in Non-Insulated and Metal-Insulated Superconducting Magnets
- 11 February 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-5
Abstract
Non-insulated (NI) and metal-insulated (MI) high-temperature superconducting magnets are of interest for a variety of magnet applications due to several advantages. One such potential advantage is the ability for NI/MI coils to redistribute current and energy throughout the winding in the event of a quench, thereby reducing the risk of thermal damage. Although prior work has demonstrated the ability of NI/MI coils to passively protect against thermal quench damage, the quench test of the SPARC Toroidal Field Model Coil (TFMC) demonstrated that passive protection is not universal for NI/MI coils, particularly coils with large stored energies per turn, high current densities, and macroscopic variations in $I_{c}$ and $T_{cs}$ along turns. This underscores the need to further understand the specific design and operating space that enables passive protection against thermal damage. To quantify this passively-protected quench space, a simple and efficient axisymmetric 2D model was developed to self-consistently study open-circuit quench in NI/MI coils. This model shows robust agreement with experimental studies of sudden-discharge, non-quench events in NI/MI coils. In addition, a slab model was developed and coupled to the axisymmetric 2D model to study thermal evolution along conductor turns in non-axisymmetric coils, such as the SPARC TFMC and future fusion coils. Validation of this novel coupled 2D-Slab model will be covered in future work, and the developed models are being used to design a medium-scale coil for exploration of the passively-safe quench space.Keywords
Funding Information
- MIT Plasma Science and Fusion Center's SPARC Fellowship Fund
This publication has 19 references indexed in Scilit:
- On fault-mode phenomenon in no-insulation superconducting magnets: A preventive approachApplied Physics Letters, 2022
- Thermal-quench behavior of non-insulated high-temperature superconducting (HTS) racetrack pancake coil with cooling channels through the epoxy surfaceResults in Physics, 2021
- Finite-element modelling of no-insulation HTS coils using rotated anisotropic resistivitySuperconductor Science and Technology, 2020
- Self-protection mechanisms in no-insulation (RE)Ba2Cu3Oxhigh temperature superconductor pancake coilsSuperconductor Science and Technology, 2016
- Analytical and experimental investigation of electrical characteristics of a metallic insulation GdBCO coilReview of Scientific Instruments, 2016
- Quench analysis of pancake wound REBCO coils with low resistance between turnsSuperconductor Science and Technology, 2015
- Over-current quench test and self-protecting behavior of a 7 T/78 mm multi-width no-insulation REBCO magnet at 4.2 KSuperconductor Science and Technology, 2015
- Calculation of alternating current losses in stacks and coils made of second generation high temperature superconducting tapes for large scale applicationsJournal of Applied Physics, 2013
- Turn-to-turn contact characteristics for an equivalent circuit model of no-insulation ReBCO pancake coilSuperconductor Science and Technology, 2013
- Numerical solution of critical state in superconductivity by finite element softwareSuperconductor Science and Technology, 2006