Redundant Robot with Pneumatic Artificial Muscles for Rehabilitation Works Using Iterative Learning Control
Open Access
- 23 August 2022
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 12 (17) , 8419
Abstract
This study aims to develop a multi-functional robotic arm with a multi-degree of freedom using a pneumatic artificial muscle cylinder as the main actuator, with a wearable function. While wearing the robotic arm, it has four degrees of freedom and can be used as an upper limb rehabilitation aid to perform rehabilitation exercise tasks. The rotating axes are driven by pneumatic artificial muscle cylinders to ensure the safety and flexibility of the robot interaction. By integrating multiple pneumatic control valves and sensors with embedded interface cards, the control of pneumatic artificial muscle cylinders is performed, and the rehabilitation trajectory commands are planned through the kinematics of the robotic arm, and a closed-loop control system is established to enable the robotic arm to achieve the task of rehabilitation trajectory tracking. In the single-axis robotic arm controller experiment, it was found that the LMS-PID is superior to the conventional PID control method. In the control experiment of the robotic arm under the multi-axis recovery trajectory, the result showed that the training of drawing a circle on the wall could be successfully planned. In the multi-axis robotic tracking experiment under the rehabilitation trajectory, the result showed that the RMSE of the tracking trajectory decreased to 0.2444 and 0.2853. In the robotic arm joining/loading experiment, it was shown that the method of this study can withstand some loading effects. Moreover, this study introduces iterative learning control to improve the non-linear compensation and phase lag problems of the PID controller so that the robot arm can have a certain tracking accuracy under the round-trip robust trajectory.Keywords
Funding Information
- National Science Council of the Republic of China (MOST 108-2221-E-027-112-MY3)
This publication has 31 references indexed in Scilit:
- Cascade position control of a single pneumatic artificial muscle–mass system with hysteresis compensationMechatronics, 2010
- Nonlinear model-based control of pneumatic artificial muscle servo systemsControl Engineering Practice, 2010
- "SOFT" EXOSKELETONS FOR UPPER AND LOWER BODY REHABILITATION — DESIGN, CONTROL AND TESTINGInternational Journal of Humanoid Robotics, 2007
- Learning from Observation Paradigm: Leg Task Models for Enabling a Biped Humanoid Robot to Imitate Human DancesThe International Journal of Robotics Research, 2007
- A Seven-degrees-of-freedom Robot-arm Driven by Pneumatic Artificial Muscles for Humanoid RobotsThe International Journal of Robotics Research, 2005
- Motion planning of redundant robots by perturbation methodMechatronics, 2004
- Iterative Learning Control of Linear Discrete-Time Multivariable SystemsAutomatica, 1998
- An iterative learning control method for continuous-time systems based on 2-D system theoryIEEE Transactions on Circuits and Systems I: Regular Papers, 1998
- Iterative learning control synthesis based on 2-D system theoryIEEE Transactions on Automatic Control, 1993
- Bettering operation of Robots by learningJournal of Robotic Systems, 1984