Impact of cement type and abutment height on pull-off force of zirconia reinforced lithium silicate crowns on titanium implant stock abutments: an in vitro study
Open Access
- 19 November 2021
- journal article
- research article
- Published by Springer Nature in BMC Oral Health
- Vol. 21 (1) , 1-8
Abstract
Background: Pull-off forces of cement-retained zirconia reinforced lithium silicate (ZLS) in implant-supported single crowns on stock titanium abutments with respect to abutment height and implant cement were evaluated and compared. Methods: Pull-off force of ZLS crowns on stock titanium abutments was evaluated concerning dental cement and abutment height. A total sample size of 64 stock abutments with heights of 3 mm (n = 32) and 5 mm (n = 32) was used. The ZLS crowns were cemented with four different types of cement (one temporary, two semi-permanent, and one permanent). After cementation, water storage, and thermocycling each sample was subjected to a pull-off test using a universal testing machine. Results: The temporary cement showed the least pull-off force regardless of abutment height (3/5 mm: means 6 N/23 N), followed by the semi-permanent methacrylate-infiltrated zinc oxide cement (28 N/55 N), the semi-permanent methacrylate-based cement (103 N/163 N), and the permanent resin composite cement (238 N/820 N). Results of all types of cement differed statistically significantly from each other (p ≤ .012). The type of implant cement has an impact on the pull-off force of ZLS crowns and titanium abutments. Conclusions: Permanent cements present higher retention than semi-permanent ones, and temporary cements present the lowest values. The abutment height had a subordinate impact.Keywords
Funding Information
- Oral Reconstruction Foundation (ORF 217)
- Universität Leipzig
This publication has 41 references indexed in Scilit:
- Influence of Cement Film Thickness on the Retention of Implant‐Retained CrownsJournal of Prosthodontics, 2013
- Cement Selection for Implant‐Supported Crowns Fabricated with Different Luting Space SettingsJournal of Prosthodontics, 2013
- Cemented and screw‐retained implant reconstructions: a systematic review of the survival and complication ratesClinical Oral Implants Research, 2012
- A Systematic Review of the Clinical Performance of Tooth‐Retained and Implant‐Retained Double Crown Prostheses with a Follow‐Up of ≥3 YearsJournal of Prosthodontics, 2012
- Prosthetic outcome of cement‐retained implant‐supported fixed dental restorations: a systematic reviewJournal of Oral Rehabilitation, 2011
- The effects of height and surface roughness of abutments and the type of cement on bond strength of cement-retained implant restorationsClinical Oral Implants Research, 2010
- Resistance to dislodgement of zirconia copings cemented onto titanium abutments of different heightsThe Journal of Prosthetic Dentistry, 2008
- Screw versus cemented implant supported restorationsBritish Dental Journal, 2006
- Virtual-Designed and Computer-Milled Implant AbutmentsJournal of Oral and Maxillofacial Surgery, 2005
- Clinical trials with crystal growth conditioning as an alternative to acid-etch enamel pretreatmentAmerican Journal of Orthodontics, 1984