Measurement of a fiber-end surface profile by use of phase-shifting laser interferometry
Authors:
- 1 January 2004
- journal article
- Published by Optica Publishing Group in Applied Optics
- Vol. 43 (1) , 49-56
Abstract
We describe a laser interferometric system in which two objectives are used to measure surface profile on a connectorized fiber-end surface. By the use of the proposed illumination design a He-Ne laser as a point light source is transformed to an extended light source, which is beneficial to localize interference fringe pattern near the test surface. To obtain an optimal contrast of the interference fringe pattern, the flat mirror with an adjustable reflection ratio is used to suit different test surfaces. A piezoelectric transducer attached on the reference mirror can move precisely along the optical axis of the objective and permits implementation of four-step phase-shifting interferometry without changing the relative position between the CCD sensor and the test surface. Therefore, an absolutely constant optical magnification can be accurately kept to capture the interference fringe patterns resulting from a combination of light reflected from both the reference flat mirror and the test surface. The experimental result shows that surface profile on a fiber-end with surface features such as a small fiber diameter of 125 μm and a low reflection ratio of less than 4% are measurable. Measurements on a standard calibration ball show that the accuracy of the proposed setup is comparable with that of existing white-light interferometers and stylus profilometers.Keywords
This publication has 16 references indexed in Scilit:
- Blocking performance of fixed‐paths least‐congestion routing in multifibre WDM networksInternational Journal of Communication Systems, 2002
- Testing micro devices with fringe projection and white-light interferometryOptics and Lasers in Engineering, 2001
- Determination of a micromirror angular rotation using laser interferometric methodOptics Communications, 2001
- Simultaneous strain and temperature measurementusing a single fibre Bragg gratingElectronics Letters, 2000
- Multifibre Application in Laser-Induced Interstitial Thermotherapy under On-Line MR ControlLasers in Medical Science, 2000
- Color-encoded digital fringe projection technique for high-speed three-dimensional surface contouringOptical Engineering, 1999
- Contour measurement by fibre optic fringe projection and Fourier transform analysisOptics Communications, 1995
- Automated phase-measuring profilometry using defocused projection of a Ronchi gratingOptics Communications, 1992
- Contouring by moiré interferometryExperimental Mechanics, 1991
- Double-source holographic contouring using fibre opticsOptics & Laser Technology, 1990