Artificial Aging Experiments of Neat and Contaminated Engine Oil Samples
Open Access
- 19 June 2021
- journal article
- research article
- Published by MDPI AG in Lubricants
- Vol. 9 (6) , 63
Abstract
This study highlights how the results from an artificial engine oil aging method compare to used engine oil samples collected from a vehicle fleet. Additionally, this paper presents the effect of contaminating the oil during aging with synthetic fuel alternatives on the physical and chemical properties of artificially aged engine oil samples. A laboratory-scale artificial thermo-oxidative aging experiment was conducted on multiple samples of commercially available formulated fully-synthetic SAE 0W-30 engine oil. The goal of the experiment was to establish the validity of the artificially aged samples as well as the validity of the underlying process in reproducibly fabricating small batches of aged engine oil with comparable chemical and physical properties to real-life used oils. Eight samples were subjected to distinct load cases (temperature, air flow rate, sample volume and aging time). Six additional samples were subjected to an intermediate load case, with five of them contaminated with selected conventional fuels and novel automotive fuel candidates. Conventional oil analysis was conducted on each sample to determine oxidation, residual additive content, kinematic viscosity and total base number. Additionally, analysis results were compared to in-use engine oil samples through PCA. The resulting oil condition after aging is in accordance with independently published results in terms of zinc dialkyldithiophosphate content and kinematic viscosity. Contaminated aging with OME 3-5 resulted in a drop in antioxidant content and elevated kinematic viscosity. Based on the comparison with in-use samples, artificial aging of 200 mL engine oil at 180 °C with 1 L/min air flow for 96 h can produce similar oil conditions as mixed vehicle use for 7000 km.Keywords
Funding Information
- Österreichische Forschungsförderungsgesellschaft (872176)
This publication has 21 references indexed in Scilit:
- Comprehensive assessment of oil degradation patterns in petrol and diesel engines observed in a field test with passenger cars – Conventional oil analysis and fuel dilutionTribology International, 2021
- Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)2021
- Artificial Aging of Ultra-low Viscosity Lubricant Samples on a Programmable Oil Aging Rig2020
- Engine Oils in the Field: A Comprehensive Chemical Assessment of Engine Oil Degradation in a Passenger CarTribology Letters, 2019
- Lubricant Additives2017
- Practice for Calculating Viscosity Index from Kinematic Viscosity at 40 and 100C2016
- Oxygenate screening on a heavy-duty diesel engine and emission characteristics of highly oxygenated oxymethylene ether fuelFuel, 2015
- Influence of Different Biogenic Fuels on Base Oil AgingSAE International Journal of Advances and Current Practices in Mobility, 2014
- Lubricants2014
- CRC Handbook of Lubrication and Tribology, Volume III1993