An Elastic-Plastic R-Curve Description of Fracture in Zr-2.5Nb Pressure Tube Alloy
Authors:
- 1 January 1979
- book chapter
- Published by ASTM International
- p. 643-662
Abstract
An R-curve approach was investigated with the aim of establishing a means of predicting critical crack lengths in Zr-2.5Nb pressure tubes using small fracture-mechanics specimens. Because of the elastic-plastic nature of the fracture process and limitations on the maximum specimen size, conventional R-curve methods were not applicable. The crack growth resistance was therefore expressed in terms of the crack opening displacement (COD) and R-curves were plotted for several sizes of specimens and crack lengths at 20°C and at 300°C. The effect of hydrogen on R-curve behavior at these two temperatures was investigated as well. Conventional clip-gage methods were not suitable for this work. Crack length was determined from electrical resistance, and COD, at the actual crack front, was determined from photographs of the specimens taken during testing. Crack length and specimen size had little, if any, effect on the R-curve shape. A method for expressing crack growth resistance in terms of the J-integral was also investigated and appears to be consistent with the COD approach. The effects of hydrogen and temperature on R-curve shape are consistent with their known effects on the mechanical behavior of Zr-2.5Nb. Finally, predictions of critical crack length in pressure tubes obtained by matching R-curves to crack driving force curves are consistent with published burst-testing data.Keywords
This publication has 8 references indexed in Scilit:
- THE USE OF THE J INTEGRAL TO MEASURE THE RESISTANCE OF MILD STEEL TO SLOW STABLE CRACK GROWTH1978
- INITIATION COD AS A FRACTURE CRITERION FOR ZR-2.5% Nb PRESSURE TUBE ALLOY1978
- The measurement of crack growth resistance curves (R-curves) using the J integralInternational Journal of Fracture, 1975
- Fracture Toughness Evaluation by R-Curve Methods1973
- Embrittlement of heat-treated Zr-2.5 wt% Nb pressure tubesCanadian Metallurgical Quarterly, 1972
- Metallurgical properties of irradiated cold-worked Zr-2.5 wt% Nb pressure tubesJournal of Nuclear Materials, 1971
- Application of the crack opening displacement approach to the prediction of pressurized tube failureInternational Journal of Fracture, 1968
- Dissolution kinetics of hydride platelets in zircaloy-4Journal of Nuclear Materials, 1968