Investigation of thermally conducting phase‐change materials based on polyethylene/wax blends filled with copper particles
Authors:
- 5 January 2010
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 116 (3) , 1766-1774
Abstract
This article reports on the morphology, melting and crystallization behavior, thermal stability, tensile properties, and thermal conductivity of phase‐change materials (PCM) for thermal energy storage. These materials were based on a soft Fischer‐Tropsch paraffin wax (PCM) blended with low‐density polyethylene, linear low‐density polyethylene, and high‐density polyethylene. These immiscible blends were melt‐mixed with copper (Cu) microparticles (up to 15 vol %) to improve the thermal conductivity in the matrix material. The presence of the Cu microparticles in the PCMs did not significantly change the crystallization behavior, thermal stability, or tensile properties of the blend composites in comparison with the corresponding polyethylene/wax blends and polyethylene/Cu composites. The observed differences were related to the fact that the wax seemed to have a higher affinity for the Cu particles than any of the polyethylenes, and so it crystallized as a layer around the Cu particles. The thermal conductivity of the samples increased almost linearly with increasing Cu content, but the samples had slightly lower values than the corresponding polyethylene/Cu composites, probably because of the lower thermal conductivity of the wax. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010Keywords
This publication has 23 references indexed in Scilit:
- Phase change materials based on low-density polyethylene/paraffin wax blendsEuropean Polymer Journal, 2007
- Study on paraffin/expanded graphite composite phase change thermal energy storage materialEnergy Conversion and Management, 2006
- Effect of carbon nanofiber additives on thermal behavior of phase change materialsCarbon, 2005
- Flammability and thermal properties of high density polyethylene/paraffin hybrid as a form‐stable phase change materialJournal of Applied Polymer Science, 2005
- Micro-encapsulated paraffin in phase-change slurriesSolar Energy Materials and Solar Cells, 2005
- A review on energy conservation in building applications with thermal storage by latent heat using phase change materialsEnergy Conversion and Management, 2004
- Review on thermal energy storage with phase change: materials, heat transfer analysis and applicationsApplied Thermal Engineering, 2003
- Preparation and performance of shape stabilized phase change thermal storage materials with high thermal conductivityEnergy Conversion and Management, 2002
- Preparation of polyethylene–paraffin compound as a form-stable solid-liquid phase change materialSolar Energy Materials and Solar Cells, 2000
- Review on sustainable thermal energy storage technologies, Part I: heat storage materials and techniquesEnergy Conversion and Management, 1998