Ultrafast 3D printing with submicrometer features using electrostatic jet deflection
Open Access
- 6 February 2020
- journal article
- research article
- Published by Springer Nature in Nature Communications
- Vol. 11 (1) , 1-9
Abstract
Additive manufacturing technologies based on layer-by-layer deposition of material ejected from a nozzle provide unmatched versatility but are limited in terms of printing speed and resolution. Electrohydrodynamic jetting uniquely allows generating submicrometer jets that can reach speeds above 1 m s−1, but such jets cannot be precisely collected by too slow mechanical stages. Here, we demonstrate that controlling the voltage applied to electrodes located around the jet, its trajectory can be continuously adjusted with lateral accelerations up to 106 m s−2. Through electrostatically deflecting the jet, 3D objects with submicrometer features can be printed by stacking nanofibers on top of each other at layer-by-layer frequencies as high as 2000 Hz. The fast jet speed and large layer-by-layer frequencies achieved translate into printing speeds up to 0.5 m s−1 in-plane and 0.4 mm s−1 in the vertical direction, three to four orders of magnitude faster than techniques providing equivalent feature sizes.Keywords
This publication has 47 references indexed in Scilit:
- Electrodynamic control of the nanofiber alignment during electrospinningApplied Physics Letters, 2013
- Highly aligned electrospun nanofibers by elimination of the whipping motionJournal of Applied Polymer Science, 2012
- Direct Writing By Way of Melt ElectrospinningAdvanced Materials, 2011
- Controlling electrospun nanofiber morphology and mechanical properties using humidityJournal of Polymer Science Part B: Polymer Physics, 2011
- Controlled Continuous Patterning of Polymeric Nanofibers on Three-Dimensional Substrates Using Low-Voltage Near-Field ElectrospinningNano Letters, 2011
- Encapsulation of cells within electrospun fibersPolymers for Advanced Technologies, 2010
- Nanopottery: Coiling of Electrospun Polymer NanofibersNano Letters, 2010
- Direct Ink Writing of 3D Functional MaterialsAdvanced Functional Materials, 2006
- Jet‐based methods to print living cellsBiotechnology Journal, 2006
- Electrospinning of Nanofibers: Reinventing the Wheel?Advanced Materials, 2004