Mechanical Properties of U-Cu Intermetallic Compound Measured by Nanoindentation
Open Access
Abstract
The physico-chemical properties of the Uranium intermetallic compound are of technological importance for improvement of the safety and compatibility of nuclear engineering systems. Diffusion couple samples with U and Cu were assembled and U-Cu intermetallic compounds were fabricated at interface by hot pressure diffusion method at a treatment temperature of 350 °C to 650 °C and at a pressure of 168 MPa in a vacuum furnace. The microstructure and element distribution of the compound phase have been studied by means of SEM, EDS, and XRD. The result showed that a new phase was developed to a thickness of approximately 10 μm with a ration of U:Cu with 1:5. Mechanical properties such as elastic moduli and hardness of the compound have been studied by means of nanoindentation. The nanoindentation testing on sample indicated that hardness of Uranium intermetallic compound are higher than that of metal U and Cu. Uranium intermetallic compound and U have a Young’s moduli with 121 GPa, 160 GPa respectively. The elastic/plastic responses of U-Cu intermetallic compound and U under nanoindentation tests were also discussed in detail.Keywords
Funding Information
- Development Fund of China Academy of Engineering Physics (2015B0301046)
This publication has 19 references indexed in Scilit:
- Anomalous multiple pop-in behavior in Cu–Sn-based intermetallic compounds during nanoindentationMaterials Science and Engineering: A, 2014
- First Principles Study of U-Al System Ground StateProcedia Materials Science, 2012
- Simulation of UAl4 growth in an UAl3/Al diffusion coupleJournal of Nuclear Materials, 2011
- Nanoindentation characterization of intermetallic compounds formed between Sn–Cu (–Ni) ball grid arrays and Cu substratesMaterials Science and Engineering: B, 2009
- Nanoindentation identifications of mechanical properties of Cu6Sn5, Cu3Sn, and Ni3Sn4 intermetallic compounds derived by diffusion couplesMaterials Science and Engineering: A, 2008
- Deformation behavior of (Cu, Ag)–Sn intermetallics by nanoindentationActa Materialia, 2004
- Young’s modulus of (Cu, Ag)–Sn intermetallics measured by nanoindentationMaterials Science and Engineering: A, 2004
- Structure of UAl4 prepared by solid state reactionJournal of Alloys and Compounds, 2001
- Mechanical and thermal properties of uranium intermetallic compoundsJournal of Alloys and Compounds, 1998
- Nuclear magnetic relaxation in the ordered state of UCu5Physica B: Condensed Matter, 1996