Ultimate Load Capacities of Plane and Axisymmetric Headed Anchors
Authors:
- 1 November 1999
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Engineering Mechanics
- Vol. 125 (11) , 1276-1279
Abstract
A finite-element-based linear elastic fracture mechanics analysis of the pullout of headed anchors is presented. The anchor is modeled as a vertically loaded crack of diameter c, embedded at a depth d, with a rigid upper surface, and traction-free lower surface. The fracture toughness and Poisson's ratio of the surrounding matrix are KIc and ν, respectively. For selected values of d/c, the mode-I stress intensity factor is calculated for each increment of the crack growth, which emanates from the edge of the anchor, and follows the direction of zero mode-II stress intensity factor. The stress intensity factors are used to calculate the ultimate load Pu, which is written as Pu = g(d/c, ν)d3/2KIc. For ν = 0.2 and relatively large values of d/c, g = 2.8 for axisymmetric anchors and g = 1.2 for plane strain anchors.Keywords
This publication has 2 references indexed in Scilit:
- Pull-out of axisymmetric headed anchorsMaterials and Structures, 1996
- Failure characteristics of short anchor bolts embedded in a brittle materialProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1986