Delay-Compound-Compensation Control for Photoelectric Tracking System Based on Improved Smith Predictor Scheme
Open Access
- 1 April 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 14 (3) , 1-8
Abstract
High control bandwidth is usually restricted in a photoelectric tracking system (PTS) based on a Charge-Couple Device(CCD) with time delay, which hinders a good tracking performance. Generally, a model-based delay-compensation controller called Smith predictor (SP) can help increase the controller gain to promote the bandwidth by separating delay from the control loop. However, the performance promotion is insufficient because the delay still stays in the forward channel which causes errors between output and input. And the increase of the controller gain is still limited due to the effect of model mismatch on stability. In this paper, to solve the problems, a delay-compound-compensation control (DCCC) based on improved SP by trajectory prediction and velocity feedforward is proposed. The additional trajectory prediction is used to further eliminate the effect of delay existing in the forward channel. The additional velocity feedforward is used to further reform the transfer characteristics limited by the controller gain. A Kalman filter-based design method of trajectory prediction is presented and the optimal design principle of feedback and feedforward controllers is given in the face of model mismatch. Experiments demonstrate that the DCCC is valid and could greatly promote the tracking performance in the low frequency.Keywords
This publication has 36 references indexed in Scilit:
- Control of a Class of Industrial Processes With Time Delay Based on a Modified Uncertainty and Disturbance EstimatorIEEE Transactions on Industrial Electronics, 2016
- Combined line-of-sight error and angular position to generate feedforward control for a charge-coupled device–based tracking loopOptical Engineering, 2015
- Fuzzy-PID control for the position loop of aerial inertially stabilized platformAerospace Science and Technology, 2014
- Line-of-sight kinematics and corrections for fast-steering mirrors used in precision pointing and tracking systems2014
- On the filtered Smith predictor for MIMO processes with multiple time delaysJournal of Process Control, 2014
- Robust stability analysis of Smith predictor-based congestion control algorithms for computer networksAutomatica, 2011
- PID-I controller of charge coupled device–based tracking loop for fast-steering mirrorOptical Engineering, 2011
- Set point weighted modified Smith predictor with PID filter controllers for non-minimum-phase (NMP) integrating processesChemical Engineering Research and Design, 2010
- Inertially stabilized platforms for optical imaging systemsIEEE Control Systems, 2008
- Improved tracking of maneuvering targets: The use of turn-rate distributions for acceleration modelingIEEE Transactions on Aerospace and Electronic Systems, 1996