Freeze∕Thaw Durability Study of MWCNT-Reinforced Nafion Membranes
Authors:
- Liang WangLWLiang Wang
- Ajay K. PrasadAPAjay K. Prasad
- Suresh G. AdvaniSASuresh G. Advani
- 1 January 2011
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 158 (12) , B1499
Abstract
Multi-walled carbon nanotubes (MWCNTs) were used to reinforce Nafion resin to improve freeze/thaw durability of proton exchange membrane fuel cells (PEMFCs). Freeze/thaw cycling was conducted over 160 cycles for MWCNTs/Nafion membranes as well as conventional Nafion-112 membranes. The performance of the membranes was measured by recording polarization curves after every 40 freeze/thaw cycles. The fuel cells with the MWCNT-reinforced membrane showed better performance than the conventional Nafion-112 membrane after freeze/thaw cycling. H2 permeability tested by the chronocoulometry method showed that the reinforced membrane, due to its improved mechanical properties and lower swelling, was able to tolerate the cyclical expansion and contraction caused by ice formation better than a Nafion-112 membrane of the same thickness. Scanning electron microscope tests revealed that the delamination between the catalyst layer and the membrane is greatly reduced for the reinforced membrane due to its improved dimensional stability. A 100-hour durability test under standard conditions showed good operational stability of the MWCNT-reinforced Nafion membrane. © 2011 The Electrochemical Society. [DOI: 10.1149/2.082112jes] All rights reservedKeywords
This publication has 16 references indexed in Scilit:
- Water removal from a PEFC during gas purgeElectrochimica Acta, 2008
- Degradation effects in polymer electrolyte membrane fuel cell stacks by sub-zero operation—An in situ and ex situ analysisJournal of Power Sources, 2008
- Physical degradation of membrane electrode assemblies undergoing freeze/thaw cycling: Micro-structure effectsJournal of Power Sources, 2007
- Isothermal Cold Start of Polymer Electrolyte Fuel CellsJournal of the Electrochemical Society, 2007
- Gas diffusion layer durability under steady-state and freezing conditionsJournal of Power Sources, 2007
- Effect of sub-freezing temperatures on a PEM fuel cell performance, startup and fuel cell componentsJournal of Power Sources, 2006
- Effects of Deep Temperature Cycling on Nafion® 112 Membranes and Membrane Electrode AssembliesFuel Cells, 2004
- Supramolecular Self-Assembly of Lipid Derivatives on Carbon NanotubesScience, 2003
- Characteristics of the PEMFC Repetitively Brought to Temperatures below 0°CJournal of the Electrochemical Society, 2003
- Single Crystals of Single-Walled Carbon Nanotubes Formed by Self-AssemblyScience, 2001