Bifunctional Sn/NaF Interlayer Enables Stable Solid State Sodium Batteries
Open Access
- 21 May 2026
- journal article
- research article
- Published by Wiley in Advanced Energy Materials
- Vol. 16 (28) , e71103
Abstract
The practical application of sodium superionic conductor (NASICON) electrolytes in solid‐state sodium batteries is restricted by poor interfacial compatibility between the solid electrolyte and Na anode, as well as continuous dendrite growth. Herein, a bifunctional Sn/NaF interlayer is introduced at the Na/Na 3.4 Zn 0.1 Zr 1.9 Si 2.2 P 0.8 O 12 (NZZP) interface to improve wettability and suppress dendrite formation. Experimental and computational results confirm that NaF with a band gap of 6.1 eV can significantly enhance the electron transport barrier to prevent Na nucleation on the side of NZZP. Moreover, the in situ formed Na x Sn alloys at Na/NaF@NZZP interface possess excellent electronic conductivity, fast Na + migration kinetics, and low interfacial energy of 14.05 meV Å −2 with Na, effectively improving interfacial contact and facilitating uniform Na plating. Benefiting from the Na x Sn/NaF interphase, the critical current density of NZZP increased from 2.7 to 11.6 mA cm −2 under 60°C. The assembled Na 3 V 2 (PO 4 ) 3 @PEG/NZZP@NaF@Sn/Na solid state batteries show a high initial reversible discharge capacity of 92.0 mAh g −1 with a capacity retention of 88.9% at 0.5C after 1000 cycles. Even at 1C and 3C, the batteries still maintain stable cycling for 10 000 cycles with capacity retention of 68.8% and 67.6%, respectively.Keywords
Funding Information
- National Natural Science Foundation of China (U21A2075)
- National Natural Science Foundation of China (52102326)
- National Natural Science Foundation of China (22309194)
- National Natural Science Foundation of China (52372244)
This publication has 50 references indexed in Scilit:
- Interfacial Sodiopobicity Regulating for Dendrite‐Free Solid‐State Sodium Metal BatteriesAdvanced Functional Materials, 2025
- In Situ Forming Na─Sn Alloy/Na2S Interface Layer for Ultrastable Solid State Sodium BatteriesAdvanced Functional Materials, 2024
- Solid Interfaces for the Garnet ElectrolytesAdvanced Materials, 2024
- Self‐Formed Fluorinated Interphase with Fe Valence Gradient for Dendrite‐Free Solid‐State Sodium‐Metal BatteriesAdvanced Functional Materials, 2023
- Long Cycle Life and High‐Rate Sodium Metal Batteries Enabled by Regulating 3D Frameworks with Artificial Solid‐State InterphasesAdvanced Energy Materials, 2022
- Liquid Metal‐Organic Frameworks In‐Situ Derived Interlayer for High‐Performance Solid‐State Na‐Metal BatteriesAdvanced Energy Materials, 2021
- Design Principles of Sodium/Potassium Protection Layer for High‐Power High‐Energy Sodium/Potassium‐Metal Batteries in Carbonate Electrolytes: a Case Study of Na2Te/K2TeAdvanced Materials, 2021
- A Robust Solid–Solid Interface Using Sodium–Tin Alloy Modified Metallic Sodium Anode Paving Way for All‐Solid‐State BatteryAdvanced Energy Materials, 2021
- Isotropous Sulfurized Polyacrylonitrile Interlayer with Homogeneous Na+ Flux Dynamics for Solid‐State Na Metal BatteriesAdvanced Energy Materials, 2021
- A High‐Performance Monolithic Solid‐State Sodium Battery with Ca2+ Doped Na3Zr2Si2PO12 ElectrolyteAdvanced Energy Materials, 2019