Reducing flexible base vibrations through local redundancy resolution
Authors:
- 1 November 1995
- journal article
- research article
- Published by Wiley in Journal of Robotic Systems
- Vol. 12 (11) , 767-779
Abstract
Future space systems will use teleoperated robotic systems mounted on flexible bases such as the Shuttle Remote Manipulator System. Due to dynamic coupling, a major control issue associated with these systems is the effect of flexible base vibrations on the performance of the robot. If uncompensated, flexible vibrations can lead to inertial tracking errors and an overall degradation in system performance. One way to overcome this problem is to use kinematically redundant robots. Thus, this article presents research results obtained from locally resolving kinematic redundancies to reduce or damp flexible vibrations. Using a planar, three‐link rigid robot example, numerical simulations were performed to evaluate the feasibility of three vibration damping redundancy control algorithms. Results showed that compared to a zero redundancy baseline, the three controllers were able to reduce base vibration by as much as 90% in addition to decreasing the required amount of joint torque. However, similar to locally optimizing joint torques, excessive joint velocities often occurred. To improve stability, fixed weight, multi‐criteria optimizations were performed. ©1995 John Wiley & Sons, Inc.Keywords
This publication has 15 references indexed in Scilit:
- Minimizing spacecraft attitude disturbances in space manipulator systemsJournal of Guidance, Control, and Dynamics, 1992
- Active vibration damping of the Space Shuttle Remote Manipulator System1991
- Trajectory design for robotic manipulators in space applicationsJournal of Guidance, Control, and Dynamics, 1991
- Preshaping Command Inputs to Reduce System VibrationJournal of Dynamic Systems, Measurement, and Control, 1990
- Redundancy resolution through local optimization: A reviewJournal of Robotic Systems, 1989
- A local solution with global characteristics for the joint torque optimization of a redundant manipulatorJournal of Robotic Systems, 1989
- Global versus Local Optimization in Redundancy Resolution of Robotic ManipulatorsThe International Journal of Robotics Research, 1988
- Continuous path control of space manipulators mounted on OMVActa Astronautica, 1987
- Efficient Dynamic Computer Simulation of Robotic MechanismsJournal of Dynamic Systems, Measurement, and Control, 1982
- On-Line Computational Scheme for Mechanical ManipulatorsJournal of Dynamic Systems, Measurement, and Control, 1980