High Toughness Independent of Low‐Medium Heat Inputs in Coarse‐Grain Heat‐Affected Zone of a Designed HSLA Steel
- 9 March 2017
- journal article
- research article
- Published by Wiley in Steel Research International
- Vol. 88 (11)
Abstract
In the present work, low‐medium heat inputs of 15, 30, and 50 kJ cm−1 are adopted to simulate Coarse‐Grain Heat‐Affected Zones (CGHAZ) of a designed HSLA steel by Gleeble‐3500 thermal simulator. Microstructures are characterized by optical microscope (OM), scanning electron microscope (SEM), and transmission electron microscope (TEM). Charpy impact tests are performed to evaluate toughness of CGHAZs. Results show that impact toughness (−50 °C) of CGHAZs with heat inputs of 15, 30, and 50 kJ cm−1 is 156.18, 172.86, and 181.49 J, respectively. Toughness stays in high level though heat input varies within low‐medium range. Evolution of microstructures is investigated and micro‐mechanisms of high toughness in all of the three heat inputs are discussed in detail. An original alloy design for HSLA steels with high toughness CGHAZ is proposed as well.Keywords
Funding Information
- No funding
This publication has 46 references indexed in Scilit:
- Effect of nitrogen on the microstructures and mechanical properties in simulated CGHAZ of vanadium microalloyed steel varied with different heat inputsMaterials Science and Engineering: A, 2016
- High temperature processed high Nb X80 steel with excellent heat-affected zone toughnessMaterials Letters, 2016
- Microstructure and toughness of the CGHAZ of an offshore platform steelJournal of Materials Processing Technology, 2015
- Micromechanism of Decrease of Impact Toughness in Coarse-Grain Heat-Affected Zone of HSLA Steel with Increasing Welding Heat InputMetallurgical and Materials Transactions A, 2015
- Influence of Martensite–Austenite constituents formed at different intercritical temperatures on toughnessMaterials & Design (1980-2015), 2015
- Analysis of martensite–austenite constituent and its effect on toughness in submerged arc welded joint of low carbon bainitic steelJournal of Materials Science, 2012
- Effect of tandem submerged arc welding process and parameters of Gleeble simulator thermal cycles on properties of the intercritically reheated heat affected zoneMaterials & Design (1980-2015), 2011
- Microstructure and toughness of coarse grain heat-affected zone of domestic X70 pipeline steel during in-service weldingJournal of Materials Science, 2010
- Influence of peak temperature during simulation and real thermal cycles on microstructure and fracture properties of the reheated zonesMaterials & Design (1980-2015), 2010
- Effect of cooling rate on the microstructure and mechanical properties of Nb-microalloyed steelsMaterials Science and Engineering: A, 2007