A large-stroke flexure fast tool servo with new displacement amplifier
Authors:
- 1 July 2017
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 52-57
Abstract
As the rapid progress of science and technology, the free-form surface optical component has played an important role in spaceflight, aviation, national defense, and other areas of the technology. While the technology of fast tool servo (FTS) is the most promising method for the machining of free-form surface optical component. However, the shortcomings of short-stroke of fast tool servo device have constrained the development of free-form surface optical component. To address this problem, a new large-stroke flexible FTS device is proposed in this paper. A series of mechanism modeling and optimal designs are carried out via compliance matrix theory, pseudo-rigid body theory, and Particle Swarm Optimization (PSO) algorithm, respectively. The mechanism performance of the large-stroke FTS device is verified by the Finite Element Analysis (FEA) method. For this study, a piezoelectric (PZT) actuator P-840.60 that can travel to 90 μm under open-loop control is employed, the results of experiment indicate that the maximum of output displacement can achieve 258.3μm, and the bandwidth can achieve around 316.84 Hz. Both theoretical analysis and the test results of prototype uniformly verify that the presented FTS device can meet the demand of the actual microstructure processing.Keywords
This publication has 7 references indexed in Scilit:
- A tensural displacement amplifier employing elliptic-arc flexure hingesSensors and Actuators A: Physical, 2016
- A novel long range fast tool servo for diamond turningThe International Journal of Advanced Manufacturing Technology, 2016
- A novel flexure-based vertical nanopositioning stage with large travel rangeReview of Scientific Instruments, 2015
- A New Flexure-Based $Y\theta$ Nanomanipulator With Nanometer-Scale Resolution and Millimeter-Scale WorkspaceIEEE/ASME Transactions on Mechatronics, 2014
- Modeling and machining evaluation of microstructure fabrication by fast tool servo-based diamond machiningPrecision Engineering, 2014
- Development and Active Disturbance Rejection Control of a Compliant Micro-/Nanopositioning Piezostage With Dual ModeIEEE Transactions on Industrial Electronics, 2013
- Design and control of a fast tool servo used in noncircular piston turning processMechanical Systems and Signal Processing, 2013