Analysis of Construction Process and Configuration Automatic Monitoring for the Spoke-Type Single-Layer Cable Net Structure
Open Access
Abstract
As a full tension structural system, the spoke-type single-layer cable net structure has a light graceful shape and superior mechanical properties. During construction, the structure will gradually be tensioned from the flexible unstressed state to the formed state with stiffness, and the structural configuration changes greatly, making construction difficult. This study focused on the spoke-type single-layer cable net structure of the Linyi Olympic Sports Center Stadium. The structural finite element model was established in ANSYS, and the construction scheme was selected and simulated using the nonlinear dynamic finite element method (NDFEM). Most of the existing structural automatic measuring systems are suitable for measuring points with gentle deformation. However, there is the lack of a stable and reliable automatic configuration monitoring system for the construction of single-layer cable net structures. Based on the Lecia TS16 robotic total station (RTS), the configuration automatic monitoring system (CAMS) was developed to obtain the coordinate data of key nodes on the ring cable and compression ring during the construction process. The original finite element model of clamps was refined to obtain the corresponding data in ANSYS. The results indicate that the selected construction scheme has a rational mechanical response according to the finite element simulation. The radial cable force when anchoring the traction cables is smaller than or equal to that in the formed state, which proves that the construction method of anchoring in batches is safe. The results of the ANSYS simulation is basically consistent with those obtained by CAMS, proving that the simulation method is credible. CAMS has good stability and measurement accuracy and can achieve the automatic monitoring of large structural deformation. The research findings provide valuable guidance for practical construction and other similar projects.Keywords
This publication has 38 references indexed in Scilit:
- Automated design of cable-net structures with multi-objective stateAutomation in Construction, 2024
- Development of laser-based displacement monitoring system and its application to large-scale spatial structuresJournal of Civil Structural Health Monitoring, 2021
- Numerical and Experimental Study on Anti-slipping Performance of Cable Clamp for Two-Way Orthogonal Full Locked Coil CablesInternational Journal of Steel Structures, 2020
- Finite element modeling of cable sliding and its effect on dynamic response of cable-supported trussFrontiers of Structural and Civil Engineering, 2019
- Equivalent-force density method as a shape-finding tool for cable-membrane structuresEngineering Structures, 2017
- Form-finding of tensegrity structures based on the Levenberg–Marquardt methodComputers & Structures, 2017
- A fully automatic group selection for form-finding process of truncated tetrahedral tensegrity structures via a double-loop genetic algorithmComposites Part B: Engineering, 2016
- An extended force density method for form finding of constrained cable netsCase Studies in Structural Engineering, 2015
- Response of a historical short-span railway bridge to passing trains: 3-D deflections and dominant frequencies derived from Robotic Total Station (RTS) measurementsEngineering Structures, 2012
- The force density method for form finding and computation of general networksComputer Methods in Applied Mechanics and Engineering, 1974