Unveiling Impact of Electron Beam Optics on Weld Attributes in EN30B Steel
Open Access
- 2 February 2024
- journal article
- Published by BON VIEW PUBLISHING PTE in Journal of Optics and Photonics Research
- Vol. 1 (3) , 109-123
Abstract
The influence of electron optics in terms of beam oscillation (BO) has been studied on weld quality of several steels and reported to develop cosmetic weld with smooth surface and enhanced weld properties. However, effect of electron BO on the weld quality of medium carbon low alloy steel, especially EN30B, has not reported well and investigated in this study. By manipulating magnetic lens in-line with electron beam, the diameter of oscillating beam (OD) and its effect on weld quality has been studied. The OD was changed between 0.5 mm and 2 mm. Numerous tests, including X-ray diffraction, scanning electron microscopy (SEM), Electron Backscattered Diffraction (EBSD), hardness, wear, and tensile, were used to characterize the weld quality. Welds with BO significantly lowered the heat input rate than welds without oscillation. In presence of BO, retained austenite (RA) in the weld increased and it became least in welds made without BO. Tensile residual stress was found in the fusion zone (FZ) and it was higher with BO, especially with higher OD. In contrast to columnar grains predominantly found in welds made without BO, significant equiaxed grains were identified in welds made with BO. Nonmetallic inclusions (NMIs) in the weld became finer and less by use of BO. Introducing BO enhanced the hardness and reduced wear rate of weld, particularly at greater beam OD. Although weld strength was diminished in comparison to the base metal (BM), BO increased the weld's ductility and strength. Received: 26 October 2023 | Revised: 15 January 2024 | Accepted: 18 January 2024 Conflicts of Interest The authors declare that they have no conflicts of interest to this work. Data Availability Statement Data sharing is not applicable to this article as no new data were created or analyzed in this study.Keywords
This publication has 34 references indexed in Scilit:
- A Study on Effect of Multiple Laser Shock Peening on Microstructure, Residual Stress, and Mechanical Strength of 2.5 Ni-Cr-Mo (EN25) Low-Alloy SteelJournal of Materials Engineering and Performance, 2022
- Review of Electron Beam Welding Technology in Space EnvironmentOptik, 2021
- Studies on Electron Beam Surface Remelted Inconel 718 SuperalloyMetals and Materials International, 2020
- Electron Beam Surface Treatment of 316L Austenitic Stainless Steel: Improvements in Hardness, Wear, and Corrosion ResistanceMetals and Materials International, 2020
- Study of microstructure difference properties of electron beam welds with beam oscillation of 50 mm 316L in CFETRFusion Engineering and Design, 2019
- Understanding of fatigue crack growth behavior in welded joint of a new generation Ni-Cr-Mo-V high strength steelEngineering Fracture Mechanics, 2018
- Effect of Heat Input on Inclusion Evolution Behavior in Heat-Affected Zone of EH36 Shipbuilding SteelJOM, 2018
- Mixed mode fatigue crack growth behavior of Ni-Cr-Mo-V high strength steel weldmentsInternational Journal of Fatigue, 2017
- Calculation of inclusion formation in low-alloy-steel weldsMaterials Science and Engineering: A, 1996
- Fracture toughness behaviour in AISI 4130 steel of electron beam weldingEngineering Fracture Mechanics, 1990