A three-dimensional numerical comparison of bearing capacity and settlement of tapered and under-reamed piles
- 7 June 2017
- journal article
- research article
- Published by Taylor & Francis in International Journal of Geotechnical Engineering
- Vol. 13 (3) , 236-248
Abstract
Tapered piles by top cross sections larger than the toe cross sections and under-reamed piles by having one or more bulbs, have the potential for substantial major sides over conventional straight-sided piles. Most of the studies on tapered and under-reamed piles have been conducted on the experimental side, while, theoretical studies, such as finite element method, have been mainly confined to conventional straight-sided piles. On the other hand, although several field, laboratory and experimental studies have been conducted to study the behaviour of tapered and under-reamed piles, few numerical studies have been carried out to simulate the behaviour of the piles. In addition, there is no research to compare and evaluate behaviour of these two piles due to different geotechnical and geometrical properties. Therefore, the aim of this study was to numerically investigate bearing capacity and settlement of tapered and under-reamed piles by changing the soil type, cohesion, angle of internal friction, the length and diameter of piles, tapering degree and the number of bulbs using finite element method. Based on the FEM results, it was found that by increasing the values of geotechnical and geometrical properties, bearing capacity of the tapered pile was more than that of the under-reamed one (i.e. settlement of tapered pile was less than that of the under-reamed one). The reason for this trend could be attributed to increasing contact surface area, friction resistance and more adhesion between soil and the tapered pile. In addition, bulb number of under-reamed piles and tapering degree of tapered piles had significant effects on settlement and bearing capacity of the piles.Keywords
This publication has 16 references indexed in Scilit:
- International Journal for Numerical and Analytical Methods in Geomechanics2017
- Finite element modelling of undrained vertical bearing capacity of piles adjacent to different types of clayey slopesInternational Journal of Geotechnical Engineering, 2016
- Undrained vertical bearing capacity of pile located near soft clay slopeJournal of Engineering Research, 2015
- Analysis of soil resistance on laterally loaded piles based on 3D soil–pile interactionComputers and Geotechnics, 2011
- Estimation of Axial Load Capacity for Bored Tapered Piles Using CPT Results in SandJournal of Geotechnical and Geoenvironmental Engineering, 2009
- Compression testing and analysis of drilled concrete tapered piles in cohesive-frictional soilCanadian Geotechnical Journal, 2008
- Investigations on the Static Behavior of Self-Compacting Concrete Under-Reamed PilesJournal of Materials in Civil Engineering, 2006
- Evaluation of axial performance of tapered piles from centrifuge testsCanadian Geotechnical Journal, 2000
- Clay–interface shear resistanceGéotechnique, 2000
- Axial capacity of tapered piles established from model testsCanadian Geotechnical Journal, 1999