Experimental Investigations on Detonation Initiation Characteristics of a Liquid-Fueled Pulse Detonation Combustor at Different Inlet Air Temperatures
Open Access
Abstract
The detonation initiation characteristics of a single tube liquid-fueled pulse detonation combustor (PDC) is investigated at different inlet air temperatures in this paper. The inner diameter of the PDC is 62 mm. Gasoline and air are used as fuel and oxidant, respectively. The inlet air temperature is 288–523 K and the operating frequency of the PDC is 10~30 Hz. The experimental results show that the deflagration to detonation transition (DDT) distance, detonation initiation time, DDT time and jet ignition time decrease with the increasing operating frequency at the same inlet temperature. When the inlet temperature is 288 K, the DDT distance is shortened from 860.5 mm to 787.7 mm as the operating frequency increases from 10 Hz to 30 Hz. The detonation initiation time, the jet ignition time and the DDT time are reduced from 10.01 ms, 7.66 ms and 2.35 ms to 6.55 ms, 4.99 ms and 1.56 ms, respectively. When the inlet air temperature increases, the atomization and evaporation of the gasoline is improved, which also leads to the decrease in the DDT distance, the detonation initiation time, the jet ignition time and the DDT time. For example, when the inlet air temperature increases from 288 K to 523 K at the frequency of 10 Hz, the DDT distance is shortened from 860.5 mm to 747.2 mm and the detonation initiation time, the jet ignition time and the DDT time is reduced to 5.867 ms, 2.51 ms and 1.11 ms, respectively. Additionally, the self-ignition caused by high inner wall temperature occurs when PDC is operating at high frequency under high inlet air temperature.Keywords
This publication has 24 references indexed in Scilit:
- Semi-free-jet simulated experimental investigation on a valveless pulse detonation engineApplied Thermal Engineering, 2014
- Propulsive Performance of Ideal Detonation Turbine Based Combined Cycle EngineJournal of Engineering for Gas Turbines and Power, 2012
- Experimental Study of Ignition and Detonation Initiation in Two-Phase Valveless Pulse Detonation EnginesCombustion Science and Technology, 2009
- Fast deflagration-to-detonation transitionRussian Journal of Physical Chemistry B, 2008
- Deflagration-to-detonation transition in a kerosene-air mixtureDoklady Physical Chemistry, 2007
- Effect of Supercritical Fuel Injection on Cycle Performance of Pulsed Detonation EngineJournal of Propulsion and Power, 2007
- Liquid-Fueled Detonations in TubesJournal of Propulsion and Power, 2006
- Stagnation Hugoniot Analysis for Steady Combustion Waves in Propulsion SystemsJournal of Propulsion and Power, 2006
- DDT in fuel–air mixtures at elevated temperatures and pressuresShock Waves, 2005
- Pulse detonation propulsion: challenges, current status, and future perspectiveProgress in Energy and Combustion Science, 2004