Influence of Transformation Temperature on the High‐Cycle Fatigue Performance of Carbide‐Bearing and Carbide‐Free Bainite
Open Access
- 10 July 2023
- journal article
- research article
- Published by Wiley in Steel Research International
- Vol. 94 (12)
Abstract
This study investigates the high‐cycle‐fatigue (HCF) behavior of carbide‐bearing bainite (CBB) and carbide‐free bainite (CFB) fabricated at different transformation temperatures. The fatigue limit of each material is determined via staircase method using a 1 kHz resonant testing machine. A new load increase test is proposed as an efficient alternative to estimate the fatigue limit in HCF regimes. The assessment of the fatigue behavior is accompanied by data‐driven microstructural analyses via state‐of‐the‐art computer vision tools. The analyses reveal that the finer carbide distribution, which is obtained at lower transformation temperature, enhances the overall performance of CBB. Electron backscatter diffraction (EBSD) measurements of CFB before and after tensile testing evidence the transformation of retained austenite (RA) to martensite during deformation. The finer film‐like and stable RAs, which are promoted via reduction in transformation temperature, enhance the HCF properties by absorbing the energy required for fatigue crack propagation through improved transformation‐induced plasticity. However, blocky unstable RA and/or martensite‐austenite (MA) islands at prior austenite grain boundaries deteriorate the HCF properties of high‐temperature CFB. Furthermore, unindexed regions in EBSD maps are effectively used to differentiate the MA islands of CFB, as validated by scanning electron microscopy (SEM) images and deep learning‐based MA island segmentation.Keywords
Funding Information
- Bundesministerium für Forschung, Technologie und Raumfahrt (13XP5118C, 13XP5118A, 13XP5118B)
This publication has 58 references indexed in Scilit:
- Rapid determination of fatigue life based on temperature evolutionInternational Journal of Fatigue, 2013
- Effect of retained austenite characteristics on fatigue behavior and tensile properties of transformation induced plasticity steelMaterials & Design (1980-2015), 2011
- Effect of low-frequency on fatigue behaviour of austenitic steel AISI 304 at room temperature and 25°CInternational Journal of Fatigue, 2008
- Deformation-induced martensite formation during cyclic deformation of metastable austenitic steel: Influence of temperature and carbon contentMaterials Science and Engineering: A, 2008
- Cyclic deformation behavior of steels and light-metal alloysMaterials Science and Engineering: A, 2007
- Staircase testing of a titanium alloy in the gigacycle regimeInternational Journal of Fatigue, 2006
- Short fatigue crack behaviour and analytical models: A reviewEngineering Fracture Mechanics, 1997
- Enhancement of fracture toughness in high strength steel by microstructural controlEngineering Fracture Mechanics, 1973
- The Up-and-Down Method for Small SamplesJournal of the American Statistical Association, 1965
- A Method for Obtaining and Analyzing Sensitivity DataJournal of the American Statistical Association, 1948