THE FATIGUE BEHAVIOUR OF GFRP BARS - EXPERIMENTAL STUDY
Authors:
Open Access
- 25 July 2019
- journal article
- Published by Czech Technical University in Prague - Central Library in Acta Polytechnica CTU Proceedings
- Vol. 22, 38-47
Abstract
The paper describes an experimental program for studying the fatigue performance of GFRP bars, which has been initiated by the authors. Two different test configurations were used to assess the fatigue behaviour. The bare specimens were tested within the first series. A modified gripping system was used to reduce eccentricity when the bar was not directly fixed. However, the boundary conditions seem to affect the results. The second series consisted of a set of specimens of bars embedded in concrete. This configuration seems appropriate for determination of fatigue life of GFRP bars. Two S-N curves for bare bars and bars embedded in concrete were created and compared. Significant reduction of interlaminar shear strength at the beginning of fatigue loading proved matrix or fibre/matrix interface damage.Keywords
This publication has 8 references indexed in Scilit:
- Long term strength of internal GFRP reinforcement by alkaline, temperature and cyclic loadingProcedia Structural Integrity, 2018
- Influence of Alkalinity and Ambient Temperature on Long-Term Properties of GFRP ReinforcementKey Engineering Materials, 2018
- Characterization and Comparative Durability Study of Glass/Vinylester, Basalt/Vinylester, and Basalt/Epoxy FRP BarsJournal of Composites for Construction, 2015
- Fatigue Behavior of GFRP Reinforcing Bars in Air and in ConcreteJournal of Composites for Construction, 2014
- Durability and Fatigue of Basalt Fiber-Reinforced Polymer Bars Gripped with Steel Wedge AnchorsJournal of Composites for Construction, 2013
- New Method for Testing Fiber-Reinforced Polymer Rods under FatigueJournal of Composites for Construction, 2000
- Bond to Concrete of FRP Rebars after Cyclic LoadingJournal of Composites for Construction, 2000
- Tension–tension axial fatigue of E-glass fiber-reinforced polymeric composites: tensile fatigue modulusConstruction and Building Materials, 1998