Low Temperature Deposition of (Ba, Sr)TiO3 Films by Electron Cyclotron Resonance Plasma Chemical Vapor Deposition
Authors:
- Shuji SoneSSShuji Sone
- Hisato YabutaHYHisato Yabuta
- Yoshitake KatoYKYoshitake Kato
- Masaji YoshidaMYMasaji Yoshida
- 1 September 1996
- journal article
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 35 (9S) , 5089-5093
Abstract
(Ba, Sr)TiO3 films deposited by electron cyclotron resonance plasma chemical vapor deposition at 450° C and 500° C are investigated. The crystallinity, evaluated by X-ray diffraction and by measuring grain size, and electrical properties of films were evaluated for changes in deposition temperature, deposition rate, and Ba content, without a post-deposition annealing. Slower deposition rates as well as higher deposition temperatures were found to improve film crystallinity. Evaluation of electrical properties and film crystallinity revealed that the optimum Ba content of a film deposited at 500° C was 0.4. A 27 nm thick film deposited on a Pt substrate at 500° C and at 1.1 nm/min with a Ba content of 0.4 exhibited a SiO2 equivalent thickness of 0.65 nm and a leakage current density of 4.6×10-7 A/cm2 at 1 V. The film composition was found to be sufficiently uniform throughout, i.e., from the top to the side of the films on a stacked bottom electrode.Keywords
This publication has 3 references indexed in Scilit:
- SrTiO3 thin films by mocvd for 1 gbit DRAM applicationIntegrated Ferroelectrics, 1995
- Chemical Vapor Deposition of ( Ba , Sr ) TiO3Journal of the Electrochemical Society, 1995
- Improved Electrical Properties of SrTiO3, Thin Films by Electron Cyclotron Resonance Plasma Chemical Vapor DepositionMRS Proceedings, 1994