Soil pore system evaluated from gas measurements and CT images: A conceptual study using artificial, natural and 3D ‐printed soil cores
Open Access
- 22 May 2020
- journal article
- research article
- Published by Wiley in European Journal of Soil Science
- Vol. 72 (2) , 769-781
Abstract
Combining digital imaging, physical models and laboratory measurements is a step further towards a better understanding of the complex relationships between the soil pore system and soil functions. Eight natural 100‐cm 3 soil cores were sampled in a cultivated Stagnic Luvisol from the topsoil and subsoil, which we assumed had contrasting pore systems. Artificial 100‐cm 3 cores were produced from plastic or from autoclaved aerated concrete (AAC). Eight vertical holes of each diameter (1.5 and 3 mm) were drilled for the plastic cylinder and for one of the two AAC cylinders. All natural and artificial cores were scanned in an X‐ray CT scanner and printed in 3D. Effective air‐filled porosity, true Darcian air permeability, apparent air permeability at a pressure gradient of 5 hPa and oxygen diffusion were measured on all cores. The active pore system characteristics differed between topsoil (sponge‐like, network of macropores of similar size) and subsoil (dominated by large vertical macropores). Active soil pore characteristics measured on a simplified pore network, that is, from artificial and printed soil cores, supported the fundamental differences in air transport by convection and diffusion observed between top‐ and subsoil. The results confirm the suitability of using the conceptual model that partitions the pore system into arterial, marginal and remote pores to describe effects of soil structure on gas transport. This study showed the high potential of using 3D‐printed soil cores to reconstruct the soil macropore network for a better understanding of soil pore functions.Keywords
Funding Information
- Seventh Framework Programme (FP7/2007e2013)
- Seventh Framework Programme
This publication has 31 references indexed in Scilit:
- Benefits and limitations of three-dimensional printing technology for ecological researchBMC Ecology, 2018
- From Real Soils to 3D-Printed Soils: Reproduction of Complex Pore Network at the Real Size in a Silty-Loam SoilSoil Science Society of America Journal, 2015
- Three‐Dimensional Printing of Macropore Networks of an Undisturbed Soil SampleVadose Zone Journal, 2015
- High-resolution X-ray computed tomography in geosciences: A review of the current technology and applicationsEarth-Science Reviews, 2013
- Prevention strategies for field traffic-induced subsoil compaction: a reviewSoil and Tillage Research, 2003
- A functional model of soil porosity used to interpret measurements of gas diffusionEuropean Journal of Soil Science, 1994
- Physical assessment of a soil with respect to rooting potentialGeoderma, 1984
- Characterization of microstructural anisotropy in orthotropic materials using a second rank tensorJournal of Materials Science, 1984
- MODELLING OF SOIL PORES AS TUBES USING GAS PERMEABILITIES, GAS DIFFUSIVITIES AND WATER RELEASEEuropean Journal of Soil Science, 1981
- A LABORATORY METHOD TO MEASURE GAS DIFFUSION AND FLOW IN SOIL AND OTHER POROUS MATERIALSEuropean Journal of Soil Science, 1981