Accurate assessment of natural frequencies for uniform and non-uniform Euler-Bernoulli beams and frames by adaptive generalized finite element method
Authors:
- 4 July 2016
- journal article
- research article
- Published by Emerald Publishing in Engineering Computations
- Vol. 33 (5) , 1586-1609
Abstract
Purpose: – The purpose of this paper is devoted to present an accurate assessment for determine natural frequencies for uniform and non-uniform Euler-Bernoulli beams and frames by an adaptive generalized finite element method (GFEM). The present paper concentrates on developing the C1 element of the adaptive GFEM for vibration analysis of Euler-Bernoulli beams and frames. Design/methodology/approach: – The variational problem of free vibration is formulated and the main aspects of the adaptive GFEM are presented and discussed. The efficiency and convergence of the proposed method in vibration analysis of uniform and non-uniform Euler-Bernoulli beams are checked. The application of this technique in a frame is also presented. Findings: – The present paper concentrates on developing the C1 element of the adaptive GFEM for vibration analysis of Euler-Bernoulli beams and frames. The GFEM, which was conceived on the basis of the partition of unity method, allows the inclusion of enrichment functions that contain a priori knowledge about the fundamental solution of the governing differential equation. The proposed enrichment functions are dependent on the geometric and mechanical properties of the element. This approach converges very fast and is able to approximate the frequency related to any vibration mode. Originality/value: – The main contribution of the present study consisted in proposing an adaptive GFEM for vibration analysis of Euler-Bernoulli uniform and non-uniform beams and frames. The GFEM results were compared with those obtained by the h and p-versions of FEM and the c-version of the CEM. The adaptive GFEM has shown to be efficient in the vibration analysis of beams and has indicated that it can be applied even for a coarse discretization scheme in complex practical problems.Keywords
This publication has 32 references indexed in Scilit:
- The Partition of Unity Finite Element Method for the simulation of waves in air and poroelastic mediaThe Journal of the Acoustical Society of America, 2014
- Performances of the Partition of Unity Finite Element Method for the analysis of two-dimensional interior sound fields with absorbing materialsJournal of Sound and Vibration, 2013
- The Generalized Finite Element Method Applied to Free Vibration of Framed Structures2011
- An adaptive generalized finite element method applied to free vibration analysis of straight bars and trussesJournal of Sound and Vibration, 2010
- Forced vibrations in the medium frequency range solved by a partition of unity method with local informationInternational Journal for Numerical Methods in Engineering, 2004
- The method of finite spheres with improved numerical integrationComputers & Structures, 2001
- Generalized finite element methods for three-dimensional structural mechanics problemsComputers & Structures, 2000
- An h-p adaptive method using cloudsComputer Methods in Applied Mechanics and Engineering, 1996
- Vibration of non-uniform rods and beamsJournal of Sound and Vibration, 1995
- Finite Element Modeling of Dynamic Behavior of Some Basic Structural MembersJournal of Vibration and Acoustics, 1992