Enabling Long-Cycling Life of Si-on-Graphite Composite Anodes via Fabrication of a Multifunctional Polymeric Artificial Solid–Electrolyte Interphase Protective Layer
- 19 August 2022
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (34) , 38824-38834
Abstract
The energy density of lithium-ion batteries (LIBs) can be meaningfully increased by utilizing Si-on-graphite composites (Si@Gr) as anode materials, because of several advantages, including higher specific capacity and low cost. However, long cycling stability is a key challenge for commercializing these composites. In this study, to solve this issue, we have developed a multifunctional polymeric artificial solid-electrolyte interphase (A-SEI) protective layer on carbon-coated Si@Gr anode particles (making Si@Gr/C-SCS) to prolong the cycling stability in LIBs. The coating is made of sulfonated chitosan (SCS) that is crosslinked with glutaraldehyde promoting good ionic conduction together with sufficient mechanical strength of the A-SEI. The focused ion beam-scanning electron microscopy and high-resolution transmission electron microscopy images show that the SCS is uniformly coated on the composite particles with thickness in nanometer. The anodes are investigated in Li metal cells Si@Gr/C-SCS||Li metal) and lithium-ion full-cells (LiNi0.6Co0.2Mn0.2O2 (NCM-622)||Si@Gr/C-SCS) to understand the material/electrode intrinsic degradation as well as the impact of the polymer coating on active lithium losses because of the continuous SEI (re)formation. The anode composites exhibit a high capacity reaching over 600 mAh g-1, and even without electrolyte optimization, the Si@Gr/C-SCS illustrates a superior long cycle life performance of up to 1000 cycles (over 67% capacity retention). The excellent long-term cycling stability of the anodes was attributed to the SCS polymer coating acting as the A-SEI. The simple polymer coating process is highly interesting in guiding the preparation of long-cycle-life electrode materials of high-energy LIB cells.Keywords
Funding Information
- Bundesministerium f?r Bildung und Forschung (03XP0133B, 03XP0133C, 03XP0340B)
- Ministry of Education (110L9006)
- Ministry of Science and Technology, Taiwan (MOST-109-2634-F-002-042, MOST-109-2923-E-011- 008, MOST-110-2221-E-002-015-MY3)
This publication has 38 references indexed in Scilit:
- Improving the cycling stability of silicon nanowire anodes with conducting polymer coatingsEnergy & Environmental Science, 2012
- Size-Dependent Fracture of Silicon Nanoparticles During LithiationACS Nano, 2012
- Investigation of the Solid Electrolyte Interphase Formed by Fluoroethylene Carbonate on Si ElectrodesJournal of the Electrochemical Society, 2011
- Block Copolymer Solid Battery Electrolyte with High Li-Ion Transference NumberJournal of the Electrochemical Society, 2010
- Artificial solid-electrolyte interphase (SEI) for improved cycleability and safety of lithium–ion cells for EV applicationsElectrochemistry Communications, 2009
- Nano- and bulk-silicon-based insertion anodes for lithium-ion secondary cellsJournal of Power Sources, 2007
- Structural Changes in Silicon Anodes during Lithium Insertion/ExtractionElectrochemical and Solid-State Letters, 2004
- Ionic conductivity of chitosan membranesPolymer, 2003
- Highly Reversible Lithium Storage in Nanostructured SiliconElectrochemical and Solid-State Letters, 2003
- Will advanced lithium-alloy anodes have a chance in lithium-ion batteries?Journal of Power Sources, 1997