The Effect of Welding Residual Stress for Making Artificial Stress Corrosion Crack in the STS 304 Pipe
Authors:
Open Access
- 2 March 2015
- journal article
- research article
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2015, 1-7
Abstract
The stress corrosion crack is one of the fracture phenomena for the major structure components in nuclear power plant. During the operation of a power plant, stress corrosion cracks are initiated and grown especially in dissimilar weldment of primary loop components. In particular, stress corrosion crack usually occurs when the following three factors exist at the same time: susceptible material, corrosive environment, and tensile stress (residual stress included). Thus, residual stress becomes a critical factor for stress corrosion crack when it is difficult to improve the material corrosivity of the components and their environment under operating conditions. In this study, stress corrosion cracks were artificially produced on STS 304 pipe itself by control of welding residual stress. We used the instrumented indentation technique and 3D FEM analysis (using ANSYS 12) to evaluate the residual stress values in the GTAW area. We used the custom-made device for fabricating the stress corrosion crack in the inner STS 304 pipe wall. As the result of both FEM analysis and experiment, the stress corrosion crack was quickly generated and could be reproduced, and it could be controlled by welding residual stress.Keywords
Funding Information
- Nuclear Safety and Security Commission
This publication has 5 references indexed in Scilit:
- Effect of residual stress induced by pulsed-laser irradiation on initiation of chloride stress corrosion cracking in stainless steelMaterials Science and Engineering: A, 2014
- The effect of residual stress on the SCC using ANSYSProcedia Engineering, 2011
- Control of welding residual stress for ensuring integrity against fatigue and stress–corrosion crackingNuclear Engineering and Design, 2007
- The Use of Acoustic Emission for the Study and Monitoring of Localized Corrosion Phenomena1994
- Acoustic emission analysis during fatigue crack growth in steelMaterials Science and Engineering, 1977