Abstract
The widespread use of prefabricated reinforced concrete products in construction is due to their high quality, reduced consumption of reinforcing elements, as well as the speed of construction of buildings on the construction site under various weather conditions. In the technological process of manufacturing flat reinforced concrete structures (RCS) at factories, it is necessary to perform operations of compaction and formation of concrete solutions in molds. Thanks to these operations, air and excess liquid are displaced, as well as filling all voids of the mold with solution, which as a result has a positive effect on the bearing capacity of the product, its durability and the quality of external surfaces. The most widespread method of compaction and formation of the solution is its vibration volumetric using various designs of vibration installations. Currently, the use of flexible universal lines, on which it is possible to produce products of different shapes and sizes, as well as from solutions of different densities, porosity and filling, is increasingly important for competitiveness in the market. Because of this, the development of vibration machines with adaptive (variable) parameters is a relevant task. The work analyzes the parameters that affect the amplitude of oscillations of the system "vibration machine - working environment" in the process of compaction of concrete solutions. The influence of the coefficient of energy loss on compaction for solutions in a form with a small height on the amplitude of oscillations is determined. It was found that to ensure the amplitude of oscillations within the limits specified by the technology, it is advisable to adjust the magnitude of the force. A functional diagram of the automation of the vibration installation is presented. A schematic diagram of the mechanism for changing the static moment of the mass of unbalances by bringing together or spreading the halves of the unbalance using a servo drive has been developed, which aims to provide the ability to adjust the magnitude of the force generated by vibrator.