Force acting on a square cylinder fixed in a free-surface channel flow
Open Access
- 4 September 2014
- journal article
- research article
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 756, 716-727
Abstract
We describe an experimental study of the forces acting on a square cylinder (of width $\def \xmlpi #1{}\def \mathsfbi #1{\boldsymbol {\mathsf {#1}}}\let \le =\leqslant \let \leq =\leqslant \let \ge =\geqslant \let \geq =\geqslant \def \Pr {\mathit {Pr}}\def \Fr {\mathit {Fr}}\def \Rey {\mathit {Re}}b$ ) which occupies 10–40 % of a channel (of width $w$ ), fixed in a free-surface channel flow. The force experienced by the obstacle depends critically on the Froude number upstream of the obstacle, ${\mathit{Fr}}_1$ (depth $h_1$ ), which sets the downstream Froude number, ${\mathit{Fr}}_2$ (depth $h_2$ ). When ${\mathit{Fr}}_1<{\mathit{Fr}}_{1c}$ , where ${\mathit{Fr}}_{1c}$ is a critical Froude number, the flow is subcritical upstream and downstream of the obstacle. The drag effect tends to decrease or increase the water depth downstream or upstream of the obstacle, respectively. The force is form drag caused by an attached wake and scales as $\overline{F_{D}}\simeq C_D \rho b u_1^2 h_1/2$ , where $C_D$ is a drag coefficient and $u_1$ is the upstream flow speed. The empirically determined drag coefficient is strongly influenced by blocking, and its variation follows the trend $C_D=C_{D0}(1+C_{D0}b/2w)^2$ , where $C_{D0}=1.9$ corresponds to the drag coefficient of a square cylinder in an unblocked turbulent flow. The r.m.s. lift force is approximately 10–40 % of the mean drag force and is generated by vortex shedding from the obstacle. When ${\mathit{Fr}}_1={\mathit{Fr}}_{1c}\, (<1)$ , the flow is choked and adjusts by generating a hydraulic jump downstream of the obstacle. The drag force scales as $\overline{F}_D\simeq C_K \rho b g (h_1^2-h_2^2)/2$ , where experimentally we find $C_K\simeq 1$ . The r.m.s. lift force is significantly smaller than the mean drag force. A consistent model is developed to explain the transitional behaviour by using a semi-empirical form of the drag force that combines form and hydrostatic components. The mean drag force scales as $\overline{F_{D}}\simeq \lambda \rho b g^{1/3} u_1^{4/3} h_1^{4/3}$ , where $\lambda $ is a function of $b/w$ and ${\mathit{Fr}}_1$ . For a choked flow, $\lambda =\lambda _c$ is a function of blocking ( $b/w$ ). For small blocking fractions, $\lambda _c= C_{D0}/2$ . In the choked flow regime, the largest contribution to the total drag force comes from the form-drag component.
Keywords
This publication has 8 references indexed in Scilit:
- Numerical Computation of Fluid-Structure Interaction on Isolated Stationary Cylinder with Elastic SurfaceJournal of Fluid Science and Technology, 2012
- Numerical study of flow through and around a circular array of cylindersJournal of Fluid Mechanics, 2011
- Flow resistance due to a single spur dike in an open channelJournal of Hydraulic Research, 2009
- The dynamics of strong turbulence at free surfaces. Part 1. DescriptionJournal of Fluid Mechanics, 2001
- Large Eddy Simulation of Flow Past a Square Cylinder: Comparison of Different Subgrid Scale ModelsJournal of Fluids Engineering, 1999
- RATIONAL ASSESSMENT OF BLOCKAGE EFFECT IN CHANNEL FLOW PAST SMOOTH CIRCULAR CYLINDERSJournal of Hydraulic Research, 1983
- Wind-tunnel-wall constraint on two-dimensional rectangular-section prismsJournal of Wind Engineering and Industrial Aerodynamics, 1978
- On the flow in channels when rigid obstacles are placed in the streamJournal of Fluid Mechanics, 1956